• Regeln für den Video-Bereich:

    In den Börsenbereich gehören nur Angebote die bereits den Allgemeinen Regeln entsprechen.

    Einteilung

    - Folgende Formate gehören in die angegeben Bereiche:
    - Filme: Encodierte Filme von BluRay, DVD, R5, TV, Screener sowie Telesyncs im Format DivX, XviD und x264.
    - DVD: Filme im Format DVD5, DVD9 und HD2DVD.
    - HD: Encodierte Filme mit der Auflösung 720p oder darüber von BluRay, DVD, R5, TV, Screener sowie Telesyncs im Format x264.
    - 3D: Encodierte Filme von BluRay, die in einem 3D Format vorliegen. Dies gilt auch für Dokus, Animation usw.
    - Serien: Cartoon/Zeichentrick, Anime, Tutorials, Dokumentationen, Konzerte/Musik, Sonstiges sind demnach in die entsprechenden Bereiche einzuordnen, auch wenn sie beispielsweise im High Definition-Format oder als DVD5/DVD9/HD2DVD vorliegen. Ausnahme 3D.
    - Bereich Englisch: Englische Releases gehören immer in diesen Bereich.
    - Bereich Talk: Der Bereich, in dem über die Releases diskutiert werden kann, darf, soll und erwünscht ist.


    Angebot/Beitrag erstellen

    - Ein Beitrag darf erst dann erstellt werden, wenn der Upload bei mindestens einem OCH komplett ist. Platzhalter sind untersagt.
    - Bei einem Scenerelease hat der Threadtitel ausschließlich aus dem originalen, unveränderten Releasenamen zu bestehen. Es dürfen keine Veränderungen wie z.B. Sterne, kleine Buchstaben o.ä. vorgenommen werden. Ausnahme Serienbörse:
    - Bei einem Sammelthread für eine Staffel entfällt aus dem Releasename natürlich der Name der Folge. Beispiel: Die Simpsons S21 German DVDRip XviD - ITG
    - Dementsprechend sind also u.a. verboten: Erweiterungen wie "Tipp", "empfehlenswert", "only", "reup", usw. / jegliche andere Zusatzinformation oder Ergänzung, welche nicht in obiger Beschreibung zu finden ist.

    Aufbau des Angebots und Threadtitel

    Der Titel nach folgendem Muster erstellt zu werden. <Name> [3D] [Staffel] [German] <Jahr> <Tonspur> [DL] [Auflösung] <Quelle> <Codec> - <Group>
    Beispiel: The Dark Knight German 2008 AC3 DVDRip XviD - iND
    Beispiel: The Dark Knight 2008 DTS DL BDRip x264 - iND
    Beispiel: The Dark Knight 2008 AC3 DL BDRip XviD - iND
    Beispiel: The Dark Knight German 2008 AC3 720p BluRay x264 iND
    Beispiel: The Dark Knight 2008 DTS DL 1080p BluRay x264 iND
    Beispiel: Die Simpsons S01 German AC3 DVDRip XviD iND
    Beispiel: Die Simpsons S20 German AC3 720p BluRay x264 iND
    Beispiel: Sword Art Online II Ger Sub 2014 AAC 1080p WEBRip x264 - peppermint
    Entsprechend sind also u.a. verboten: Sonderzeichen wie Klammern, Sterne, Ausrufezeichen, Unterstriche, Anführungszeichen / Erweiterungen wie "Tipp", "empfehlenswert", "only", "reup", usw. / jegliche andere Zusatzinformation oder Ergänzung, welche nicht in obiger Beschreibung zu finden ist
    Ausnahmen hiervon können in den Bereichen geregelt sein.

    Die Beiträge sollen wie folgt aufgebaut werden:
    Überschrift entspricht dem Threadtitel
    Cover
    kurze Inhaltsbeschreibung
    Format, Größe, Dauer sind gut lesbar für Downloader außerhalb des Spoilers zu vermerken
    Nfo sind immer Anzugeben und selbige immer im Spoiler in Textform.
    Sind keine Nfo vorhanden z.B. Eigenpublikationen, sind im Spoiler folgende Dateiinformationen zusätzlich anzugeben :
    Quelle
    Video (Auflösung und Bitrate)
    Ton (Sprache, Format und Bitrate der einzelnen Spuren)
    Untertitel (sofern vorhanden)
    Hosterangabe in Textform außerhalb eines Spoiler mit allen enthaltenen Hostern.
    Bei SD kann auf diese zusätzlichen Dateiinformationen verzichtet werden.

    Alle benötigten Passwörter sind, sofern vorhanden, in Textform im Angebot anzugeben.
    Spoiler im Spoiler mit Kommentaren :"Schon Bedankt?" sind unerwünscht.


    Releases

    - Sind Retail-Release verfügbar, sind alle anderen Variationen untersagt. Ausnahmen: Alle deutschen Retail-Release sind CUT, in diesem Fall sind dubbed UNCUT-Release zulässig.
    - Im Serien-Bereich gilt speziell: Wenn ein Retail vor Abschluss einer laufenden Staffel erscheint, darf diese Staffel noch zu Ende gebracht werden.62
    - Gleiche Releases sind unbedingt zusammenzufassen. Das bedeutet, es ist zwingend erforderlich, vor dem Erstellen eines Themas per Suchfunktion zu überprüfen, ob bereits ein Beitrag mit demselben Release besteht. Ist dies der Fall, ist der bereits vorhandene Beitrag zu verwenden.
    - P2P und Scene Releases dürfen nicht verändert oder gar unter einem iND Tag eingestellt werden.


    Support, Diskussionen und Suche

    - Supportanfragen sind entweder per PN oder im Bereich Talk zu stellen.
    - Diskussionen und Bewertungen sind im Talk Bereich zu führen. Fragen an die Uploader haben ausschließlich via PN zu erfolgen, und sind in den Angeboten untersagt.
    - Anfragen zu Upload-Wünschen sind nur im Bereich Suche Video erlaubt. Antworten dürfen nur auf Angebote von MyBoerse.bz verlinkt werden.


    Verbote

    - Untersagt sind mehrere Formate in einem einzigen Angebotsthread, wie beispielsweise das gleichzeitige Anbieten von DivX/XviD, 720p und 1080p in einem Thread. Pro Format, Release und Auflösung ist ein eigener Thread zu eröffnen.
    - Grundsätzlich ebenso verboten sind Dupes. Uploader haben sich an geeigneter Stelle darüber zu informieren, ob es sich bei einem Release um ein Dupe handelt.
    - Gefakte, nur teilweise lauffähige oder unvollständige Angebote sind untersagt. Dies gilt auch für eigene Publikationen, die augenscheinlich nicht selbst von z.B. einer DVD gerippt wurden. Laufende Serien, bei denen noch nicht alle Folgen verfügbar sind, dürfen erstellt und regelmäßig geupdatet werden.
    - Untersagt sind Angebote, welche nur und ausschließlich in einer anderen Sprache als deutsch oder englisch vorliegen. Ausnahmen sind VORHER mit den Moderatoren zu klären.


    Verstoß gegen die Regeln

    - Angebote oder Beiträge, die gegen die Forenregeln verstoßen, sind über den "Melden"-Button im Beitrag zu melden.
  • Bitte registriere dich zunächst um Beiträge zu verfassen und externe Links aufzurufen.

*** Bestes IPTV *** bester Preis *** gratis Test ***



Englische Tutorials

Microsoft Office; Excel, Word & Powerpoint 2019 - Beginners

k1513nam7y5ytnauownnv85d7p.jpg


Microsoft Office; Excel, Word & Powerpoint 2019 - Beginners
Last updated 5/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 13.31 GB | Duration: 26h 27m

Learn the essentials of Microsoft Office in this 3-course bundle for Office 365 or Office 2019 users.



What you'll learn
Learn the essential Microsoft Office Skills in this three-course bundle: Excel, Word and PowerPoint
Discover new and improved features in Excel 2019.
Complete data entry, cell formatting, working with multiple worksheets and the "Ribbon" interface.
Discover how to format dates and numbers in Excel.
Learn practical methods to backup and recover your Excel spreadsheets and never lose data.
Effectively use autofill and flashfill so you are more productive in Microsoft Excel.
Discover the essentials of using formulas and functions
Discover how to create stunning charts and graphs in Excel
Learn practical methods to sort and filter your data
Discover new features in PowerPoint 2019 including Icons and 3D Models
Learn how to insert shapes, graphics and pictures to add some "zing" to your PowerPoint
Add charts, graphs and tables to present information in a non-text format
Wow your audience by adding animations, audio and video
Discover practical tips to present your presentation to your audience
Learn time saving techniques including how to copy slides, and exporting your presentation
Master the most common uses of Microsoft Word
How to controlling page appearance including using columns, indents, footers, borders and watermarks.
How to create a mail merge in Microsoft Word
Learn how to correctly Print envelopes and labels in Word
Learn to protect your Word document from changes
Insert professional pictures and graphics in your Word document
Make your Word documents look amazing by inserting and editing tables

Requirements
Excel, Word, and PowerPoint installed on your machine. Preferably Office 2019 or Office 365

Description
**This course includes practice exercises and LIFETIME access**Massive value bundle - 3 full courses in one! Learn Excel, PowerPoint and Word 2019 with Microsoft Office experts Simon Sez IT.This mega Microsoft Office bundle is perfect if you're looking to finally get to grips with Excel, PowerPoint and Word. Each course goes into depth on how to get the most from each program and will help you become an intermediate user.What's included?Excel 2019What's new in Excel 2019Creating workbooksEntering text, numbers and working with datesNavigating workbooksPage setup and print optionsWorking with rows, columns and cellsCut, Copy and PasteIntroduction to functions and formulasFormatting in Excel, including formatting cells and numbersCreating charts and graphsSorting and FilteringIntroduction to PivotTablesLogical and lookup formulas - the basicsPowerPoint 2019How to navigate around PowerPointPresentation dos and don'tsText and bullet edition optionsHow to use graphics, images, objects and shapesUsing SmartArtWorking with Charts and GraphsHow to utilize Master Slides and just how much time this could save youHow to add audio and video to a presentationAll about transitions between slidesAnimation, the animation pane and motion pathsSetting your slideshow optionsPresentation preparation and deliveryThe backstage area of PowerPoint including printing a presentationWord 2019How to get started with Word 2019Word 2019 basics including navigation, editing and savingCharacter formatting in Word including Format Painter and AutoCorrectHow to properly work with bullets and numbering in Microsoft WordAll about formatting paragraphs and managing listsWorking with Tables in Word including formatting, converting data and formulasPage appearance including page-breaks, watermarks and stylesAll about Sectioning a documentInserting graphics, pictures, shapes, icons and 3d models (new for 2019)How to work with envelopes and labelsAll about mail-merge and operating Word at scaleHow to create an Index or Contents pageReviewing and Printing in Word and Page SetupProtecting a Word document and basic macros in Word***Exercise and demo files included***This bundle includes:21+ hours of video tutorials250+ individual video lecturesExercise files to practice what you learnedCertificate of completionHere's what our students are saying."I've been familiar with this program for years, but am getting more comfortable and learning more than I could have imagined this early in the course."- Aimee Hutcherson"I'm learning alot of new material that I had no idea existed. So yes , I'm very much liking this course. Will continue to practice all the new skills I've learned thus far."- Eralda Chung-Colon"I enjoy learning all of the new things in this course so far and I really appreciate how thorough the instructor is at explaining everything. Great Course!!"- Jennifer LambertDid you know?Simon Sez IT teaches all sorts of software, including:- Microsoft Excel- Microsoft PowerPoint- Microsoft Word- Microsoft Project- Microsoft Outlook- QuickBooks- Photoshop Elements- Web Development Languages- And so much more!

Overview

Section 1: Excel 2019: Introduction

Lecture 1 Intro to Excel

Lecture 2 WATCH ME: Essential Information for a Successful Training Experience

Lecture 3 Course Exercise Files

Lecture 4 Downloadable Course Transcripts

Lecture 5 What's New In Excel 2019

Lecture 6 Course Overview

Lecture 7 Overview of the Excel window

Lecture 8 Mouse-Features

Lecture 9 Back Stage View

Section 2: Excel 2019 Beginner: Creating Workbooks

Lecture 10 Entering Text and Numbers

Lecture 11 Creating Basic Formulas

Lecture 12 Relative References

Lecture 13 Order of Operations

Lecture 14 Working with Ranges

Lecture 15 Module 2 - Practice Exercise

Section 3: Excel 2019 Beginner: Saving Workbooks

Lecture 16 Working with the Save and Save As Commands

Lecture 17 File Extensions, Share, Export and Publish Files

Lecture 18 Module 3 - Practice Exercise

Section 4: Excel 2019 Beginner: Navigating Workbooks

Lecture 19 Opening a File

Lecture 20 Working with Larger Files

Lecture 21 Freeze Panes Option

Lecture 22 Split Screen Option

Lecture 23 Module 4 - Practice Exercise

Section 5: Excel 2019 Beginner: Page Setup & Print Options

Lecture 24 Headers and Footers

Lecture 25 Print Titles

Lecture 26 Comments

Lecture 27 Page Setup Options

Lecture 28 Fit to Print on One Page

Lecture 29 Printing Workbooks

Lecture 30 Module 5 - Practice Exercise

Section 6: Excel 2019 Beginners: Working with Rows, Columns and Cells

Lecture 31 Adding and deleting rows columns and cells

Lecture 32 Changing Column and-Row Widths

Lecture 33 Module 6 - Practice Exercise

Section 7: Excel 2019 Beginners: Moving Data

Lecture 34 Cut, Copy and Paste

Lecture 35 Copying Formulas

Lecture 36 Module 7 - Practice Exercise

Section 8: Excel 2019 Beginners: Formulas & Functions

Lecture 37 Overview of Formulas

Lecture 38 Create Formulas Using Functions Part 1

Lecture 39 Create Formulas Using Functions Part 2

Lecture 40 Absolute Values

Lecture 41 Module 8 - Practice Exercise

Section 9: Excel 2019 Beginner: Working with Sheets

Lecture 42 Adding Deleting and Renaming Sheets

Lecture 43 Additional Sheet Tab Options

Lecture 44 3 Dimensional Formulas

Section 10: Excel 2019 Beginner: Formatting Worksheets

Lecture 45 Formatting Cells Part 1

Lecture 46 Formatting Cells Part 2

Lecture 47 Formatting Numbers

Lecture 48 Borders and Shading

Lecture 49 Format as Table

Lecture 50 Using Styles

Lecture 51 Using Format Painter

Lecture 52 Protecting Sheets

Lecture 53 Fill Handle and Custom Lists

Lecture 54 Module 10 - Practice Exercise

Section 11: Excel 2019 Beginner: Charts

Lecture 55 Creating Charts

Lecture 56 Types of Charts

Lecture 57 Editing Charts Part 1

Lecture 58 Editing Charts Part 2

Lecture 59 Using Graphics to Enhance Charts

Lecture 60 Linking Chart Titles

Lecture 61 Module 11 - Practice Exercise

Section 12: Excel 2019 Beginner: Working with Names

Lecture 62 Creating Range Names

Lecture 63 Managing Names

Lecture 64 Using Names in Formulas

Lecture 65 Module 12 - Practice Exercise

Section 13: Excel 2019 Beginner: Sorting and Filtering

Lecture 66 Remove Duplicates

Lecture 67 Sort Data

Lecture 68 Filter Data

Lecture 69 Advanced Filters

Lecture 70 Module 13 - Practice Exercise

Section 14: Excel 2019 Beginner: Outlining and Subtotaling

Lecture 71 Creating an Outline

Lecture 72 Subtotals

Lecture 73 Module 14 - Practice Exercise

Section 15: Excel 2019 Beginner: Working with Views

Lecture 74 Arranging Files

Lecture 75 New Window Option

Lecture 76 Custom Views

Lecture 77 Module 15 - Practice Exercise

Section 16: Excel 2019 Beginner: Linking Files

Lecture 78 Creating Formulas Between File

Lecture 79 Working with Links

Lecture 80 Consolidating Data

Lecture 81 Module 16 - Practice Exercise

Section 17: Excel 2019 Beginner: Advanced Formula Creation

Lecture 82 If Statements

Lecture 83 VLookups

Lecture 84 Data Validation

Lecture 85 Formula Auditing

Lecture 86 Module 17 - Practice Exercise

Section 18: Excel 2019 Beginner: Pivot Tables

Lecture 87 Pivot Tables

Lecture 88 Pivot Charts

Lecture 89 Module 18 - Practice Exercise

Section 19: Excel 2019 Beginner: Additional Excel Features

Lecture 90 Slicers

Lecture 91 Goal Seeker

Lecture 92 Text to Columns

Lecture 93 Watch Window

Lecture 94 Customizing Ribbons and Tabs

Lecture 95 Module 19 - Practice Exercise

Section 20: Excel 2019 Beginner: Shortcuts

Lecture 96 Excel Shortcuts Every User Should Know

Section 21: Excel 2019 Beginner: Closing

Lecture 97 Closing Video

Section 22: PowerPoint 2019: Course Introduction

Lecture 98 Welcome and Overview

Lecture 99 WATCH ME: Essential Information for a Successful Training Experience

Lecture 100 DOWNLOAD ME: Course Exercise Files

Lecture 101 Downloadable Course Transcripts

Section 23: PowerPoint 2019: Overview

Lecture 102 Navigate a PowerPoint Presentation

Lecture 103 Overview of the Screen and Views

Lecture 104 Exercise 1

Section 24: PowerPoint 2019: Getting Started

Lecture 105 Presentation Tips and Guidelines

Lecture 106 Creating a New Presentation

Lecture 107 Working with Slides

Lecture 108 Saving a Presentation

Lecture 109 Exercise 02

Section 25: PowerPoint 2019: Text and Bullet Editing Options

Lecture 110 Formatting Text

Lecture 111 Working with Bullets and Numbered Lists

Lecture 112 Exercise 03

Section 26: PowerPoint 2019: Adding Graphics

Lecture 113 Inserting Shapes

Lecture 114 Inserting Graphics

Lecture 115 Inserting Icons and 3D Models

Lecture 116 Inserting Pictures

Lecture 117 Exercise 04

Section 27: PowerPoint 2019: Working with objects

Lecture 118 Selecting Objects

Lecture 119 Editing Objects

Lecture 120 Formatting Objects - Part 1

Lecture 121 Formatting Objects - Part 2

Lecture 122 Arranging Objects

Lecture 123 Grouping Objects

Lecture 124 Exercise 05

Section 28: PowerPoint 2019: Editing Pictures

Lecture 125 Picture Options

Lecture 126 Cropping Pictures

Lecture 127 Formatting Pictures

Lecture 128 Things You Can Do with Pictures

Lecture 129 Exercise 06

Section 29: PowerPoint 2019: Working with SmartArt

Lecture 130 Creating SmartArt

Lecture 131 Modifying SmartArt

Lecture 132 Creating a Flowchart using SmartArt

Lecture 133 Exercise 07

Section 30: PowerPoint 2019: Working with Tables

Lecture 134 Creating Tables

Lecture 135 Formatting Tables

Lecture 136 Inserting Tables

Lecture 137 Exercise 08

Section 31: PowerPoint 2019: Working with Charts

Lecture 138 Adding Charts

Lecture 139 Formatting Charts

Lecture 140 Inserting Charts from Microsoft Excel

Lecture 141 Exercise 09

Section 32: PowerPoint 2019: Unlocking the Power of Masters

Lecture 142 Using Master Slides

Lecture 143 Modifying Master Slides

Lecture 144 Creating a New Master Design Template

Lecture 145 Exercise 10

Section 33: PowerPoint 2019: Adding Media

Lecture 146 Adding Video to a Presentation

Lecture 147 Adding Audio to a Presentation

Lecture 148 Exercise 11

Section 34: PowerPoint 2019: Working with Transitions

Lecture 149 Applying Transitions

Lecture 150 Transition Options

Lecture 151 Exercise 12

Section 35: PowerPoint 2019: Animation

Lecture 152 Animating an Object

Lecture 153 Effect Options

Lecture 154 Working with the Animation Pane

Lecture 155 Motion Paths

Lecture 156 Triggers

Lecture 157 Exercise 13

Section 36: PowerPoint 2019: Hyperlinks and Action Buttons

Lecture 158 Working with Action Buttons

Lecture 159 Working with Hyperlinks

Lecture 160 Exercise 14

Section 37: PowerPoint 2019: Slideshow Options

Lecture 161 Onscreen Presentation Options

Lecture 162 Hiding Slides

Lecture 163 Changing the Order of Slides

Lecture 164 Copying Slides

Lecture 165 Slideshow Options

Lecture 166 Exercise 15

Section 38: PowerPoint 2019: Preparing a Presentation for Delivery

Lecture 167 Rehearse Timings

Lecture 168 Recording a Presentation

Lecture 169 Slide Show Settings

Lecture 170 Creating a Custom Slide Show

Lecture 171 Exercise 16

Section 39: PowerPoint 2019: Exploring the Backstage Area

Lecture 172 Exporting options

Lecture 173 The Backstage Area

Lecture 174 Printing a Presentation

Lecture 175 Exercise 17

Section 40: PowerPoint 2019: Course Close

Lecture 176 Conclusion

Section 41: Word 2019: Introduction

Lecture 177 Welcome and Overview

Lecture 178 WATCH ME: Essential Information for a Successful Training Experience

Lecture 179 DOWNLOAD ME: Course Exercise Files

Lecture 180 Downloadable Course Transcripts

Lecture 181 Overview of the MS Word Screen

Lecture 182 The Backstage View

Section 42: Word 2019: Getting Started with Word

Lecture 183 Creating a New Blank Document

Lecture 184 Working with Non-Printing Characters and Line Spacing

Lecture 185 Saving a Document

Lecture 186 Opening a Document

Lecture 187 Navigating a Document

Lecture 188 Go To, Find and Replace

Lecture 189 Editing a Document

Lecture 190 Practice Exercise

Section 43: Word 2019: Character Formatting

Lecture 191 AutoCorrect Options

Lecture 192 Selecting Text

Lecture 193 Cut, Copy and Paste

Lecture 194 Character Formatting Options

Lecture 195 Format Painter

Lecture 196 Working with Numbers

Lecture 197 Working with Bullets

Lecture 198 Creating an Outline

Lecture 199 Practice Exercise

Section 44: Word 2019: Paragraph Formatting

Lecture 200 Alignment Options

Lecture 201 Line Spacing Options

Lecture 202 Working with Indents

Lecture 203 Working with Tabs

Lecture 204 Practice Exercise

Section 45: Word 2019: Managing Lists

Lecture 205 Sorting a List

Section 46: Word 2019: Tables

Lecture 206 Working with Tables

Lecture 207 Creating a Table

Lecture 208 Adding Rows and Columns to a Table

Lecture 209 Formatting Table Data

Lecture 210 Borders and Shading

Lecture 211 Sorting in a Table

Lecture 212 Drawing in a Table

Lecture 213 Converting Existing Data to a Table

Lecture 214 Quick Tables

Lecture 215 Using Formulas in Tables

Lecture 216 Practice Exercise

Section 47: Word 2019: Styles

Lecture 217 Working with Styles

Lecture 218 Creating Styles

Lecture 219 Editing Styles

Lecture 220 Practice Exercise

Section 48: Word 2019: Controlling Page Appearance

Lecture 221 Working with Page Breaks

Lecture 222 Working with Columns

Lecture 223 Adding a Watermark

Lecture 224 Headers and Footers

Section 49: Word 2019: Sectioning

Lecture 225 What is Sectioning?

Lecture 226 Sectioning a Document

Lecture 227 Odd and Even Sections

Lecture 228 Practice Exercise

Section 50: Word 2019: Graphics

Lecture 229 Inserting Pictures

Lecture 230 Inserting Pictures into Existing Documents

Lecture 231 Picture Options

Lecture 232 Working with Shapes

Lecture 233 Icons and 3D Models

Lecture 234 SmartArt, Charts and Screenshots

Lecture 235 Practice Exercise

Section 51: Word 2019: Envelopes and Labels

Lecture 236 Working with Envelopes

Lecture 237 Working with Labels

Section 52: Word 2019: Mail Merges

Lecture 238 What is Mail Merge?

Lecture 239 Creating a Mail Merge Document - Part 1

Lecture 240 Creating a Mail Merge Document - Part 2

Lecture 241 Merging a Document with an Existing Data Source

Lecture 242 Merging Envelopes and Labels

Lecture 243 Merging a Directory

Lecture 244 Practice Exercise

Section 53: Word 2019: Page Setup Options

Lecture 245 Building Blocks

Lecture 246 Auto Text

Lecture 247 Practice Exercise

Section 54: Word 2019: Indexing and Table of Contents

Lecture 248 Creating an Index

Lecture 249 Creating a Table of Contents

Lecture 250 Practice Exercise

Section 55: Word 2019: Review and Printing

Lecture 251 Using the Thesaurus and Spell Check

Lecture 252 Comments

Lecture 253 Page Setup Options

Lecture 254 Printing

Lecture 255 Practice Exercise

Section 56: Word 2019: Other Word Options

Lecture 256 Word Options

Lecture 257 Protecting a Document

Lecture 258 Macros

Section 57: Wrap Up

Lecture 259 Closing

Section 58: Extras

Lecture 260 EXTRA LESSON: Designing Better Spreadsheets Webinar Recording

Lecture 261 EXTRA LESSON: Data Cleaning in Excel Webinar Recording

Lecture 262 EXTRA LESSON: Top Ten Excel Functions You HAVE to Know Webinar Recording

Lecture 263 EXTRA LESSON: Creating Engaging PowerPoint Presentations Webinar Recording

Lecture 264 EXTRA RESOURCE: The Most Frequently Used PowerPoint Shortcuts - Infographic

Lecture 265 EXTRA RESOURCE: The Most Frequently Used Excel Shortcuts - Infographic

Lecture 266 EXTRA RESOURCE: The Most Frequently Used Word Shortcuts - Infographic

Section 59: Congratulations!

Lecture 267 BONUS Lecture

Anyone new to Microsoft Office or upgrading from a previous version

Homepage


57editingchartspart1s11d0r.jpg












 
The Ultimate Facial Gua Sha/Jade Rolling Certificate Course

4846768cf613e3ie9.jpg


The Ultimate Facial Gua Sha/Jade Rolling Certificate Course
Published 09/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 48 lectures (4h 9m) | Size: 5.42 GB

Learn the incredible anti-aging facial massage techniques for yourself or your massage clients with gua sha/jade rolling



What you'll learn
Learn how to give yourself and your massage clients a completely unique facial gua sha and jade rolling treatment that gets incredible results!
You will learn how to do an incredible anti-aging facial rejuvenation treatment for your face and see incredible results.
You will learn how to do facial manual lymphatic drainage to give you and your massage clients vastly better results
You will learn how to make your own spa facial products and you can apply them to your face or your massage clients to enhance the gua sha effects even further
You will learn how to do a completely unique gua sha facial treatment that you can now offer for your massage clients and start promoting it.


Requirements
You will need a jade roller and a gua sha tool, any facial cleanser and an oil or serum to apply to your face


Description
Welcome to The Ultimate Facial Gua Sha and Jade Rolling Certificate Course!

This course facial gua sha massage and jade rolling course is completely different from any other course out there as you are about to learn.

You are going to learn a completely new approach that will give you better rejuvenating and anti-aging results for yourself and your massage clients

If you would like to experience the rejuvenating benefits of facial gua sha and jade rolling that has been used for thousands of years and not only that, but learn how to give your massage clients an incredible spa facial treatment that will be unlike any other.

You will be taken step by step firstly of why you will learn this approach to get maximum results and then how you can do facial gua sha and jade rolling for your own face to receive these incredible benefits.

Then you will learn how to give your massage clients these treatments that will be unlike any they have ever experienced.

Imagine this stand alone spa facial rejuvenation package that you will be able to offer your clients and they will see remarkable results!

You will also learn how to do facial manual lymphatic drainage and as you will see, is imperative to do so that you see better facial rejuvenation and anti-aging benefits for yourself and also your massage clients!

You are also going to learn how to make your own natural facial products that you can use for yourself or your massage clients to see even better results.

You will learn how to make

all natural face masks

natural facial cleansers

serum blends for specific skin types

the best essential oils for all skin types

the best carrier oils for certain skin types

treatments for acne

and so much more!

You will also learn how to package and market your new spa facial gua sha and jade rolling treatments for your spa.

This course will take you through everything that you need to know and by the end of it you will be able to treat yourself and your massage clients with ease and confidence and give them a spa facial treatment like nothing they have ever experienced before!

Are you ready?

Let's go and have some fun!

Who this course is for
This course is designed so that massage therapists can start promoting and doing this amazing spa facial treatment to their massage clients
If you are not a massage therapist you can still do this course and receive the incredible benefits of facial gua sha and jade rolling. You will learn everything that you need to know.
This course is also for those that would love to make some natural products for their face so that you can use chemical free ingredients and stop the need to spend large amounts of money on store bought products

Homepage


1.acneproneskinandhowhef70.jpg









 
Practical Etabs Training Of G+9 Building With Rsa Analysis

ofxj7jebj6ugfeeft1urfp5ca2.jpg


Practical Etabs Training Of G+9 Building With Rsa Analysis
Published 9/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 15.97 GB | Duration: 28h 19m

Analysis & Design of G+9 Residential building with Static & Dynamic Response Spectrum Analysis method in Practical way.



What you'll learn
Introduction to Etabs software and its special features.
How to use architectural drawing to calculate center line of building.
Calculation of center line distances for grid calculation input and center line drawing preparation for Etabs
Creating Grids and Levels as initial input from center line drawing prepared
Defining member, element and material properties
Modelling beams and columns of G+9 Building.
Modelling slabs, shear walls, stair case room in G+9 building.
Defining various type of loads for G+9 building
Assigning properties and loads on G+9 building structure.
Defining Loading combinations for analysis of G+9 building.
Defining RSA functions,Manual calculation of sa/g acceleration values and load parameters for G+9 building.
Creating Dynamic modal cases,Checking the model for error and trouble shooting.
Performing Static & Response Spectrum Analysis and reading the results of analysis.
Comparing the both analysis results and correcting scale factor for base shears and other design parameters.
Correcting story deflections, drifts, and story torsional effects in modal by shear wall or bracing insertion.
Performing structural design with static & dynamic both cases.
Understanding the software output design results and how to use in detailing.
Exporting etabs file to RCDC advanced design & detailing purpose.
Report creation

Requirements
No prior Etabs knowledge or experience required to join this course. From scratch to advanced level training included.
Even students or fresh graduates can learn easily.
Windows system with 4 GB RAM will be good enough.

Description
GURURAYAR ASSOCIATES (ENGINEERING CONSULTANCY & TRAINING'S) ISO 9001-2015 CERTIFIES COMPANYWe are GURURAYAR ASSOCIATES MSME registered and ISO 9001-2015 certified single ownership company established in 2016 with 25 years of Industrial, commercial and residential design/consultancy experience in the field, we decided to alter direction. Now, we share our passion by helping others. OUR MISSION: To build an independent professional structural design engineers/consultants in all over India and abroad as well. We train people with our practical design methodology which is being currently practiced in engineering consultancy. We are committed to excel the quality and economic structural design services to our clients as well. Our ramp up process is designed to empower your team. Business mentors are key-that's why when it comes to client selection, we're choosy. We want to give each of you the right time and guidance you deserve. OUR VISION :"To give real service, you must add something which cannot be bought or measured by MONEY"- Sir M.Vishveshwarayya.OUR MOTTO: HELP EACH OTHER! GROW TOGETHER!! TRANSFORMING MILLIONS OF CIVIL ENGINEERS FROM ALL OVER THE GLOBE IN TO DESIGNING AND CONSULTANTS FIELD!.COURSE DESCRIPTION: Detailed Syllabus For Static G+9 Residential Building Modelling, Analysis & Design:- Introduction  Structure  Types of structures  Basic definitions  Idealization of structures  About ETABS  Features  hardware requirements  ETABS screen organization  GUI overview  Unit systems  Structure geometry  Coordinate systems (Global and Local)  The Structural Model  Units  Objects and Elements  Groups  Coordinate Systems and Grids  Properties  Load Cases  Functions  Analysis Cases  Combinations  Design settings  Output and Display Definitions  The Graphical User Interface  The ETABS Screen  Main Window  Menu Bar  Toolbars  Display Windows  Status Line  Using the Mouse  Viewing Options  2-D and 3-D Views  Perspective  Pan, Zoom, and 3-D Rotate  Limits  Element View Options  Other Options  Refreshing the Display Window  Basic Operations  File Operations  Defining Named Entities  Drawing Objects  Snap Tools  Drawing Controls  Selecting  Selecting Graphically  Selecting by Feature  Editing  Assigning  Undo arid Redo  Analyzing  Displaying  Graphical Displays  Model Definition  Analysis Results  Function Plots  Tabular Displays  Designing  Locking and Unlocking  Entering Numerical Data Setting Options  Define Grid System  Selecting template  Entering Grid System Data  Adding Grid Lines In X, Y and Z Directions  Define Material Properties Specify Design Parameters Material Property Data  Define Section Properties  Add Frame Section Property  Specify Frame Section Properties for Beam  Add New Frame Section Properties for Column  Specify Area Section Properties for Slab  Draw  Drawing beams with different methods  Drawing Colum as with different orientation  Drawing slabs  Assigning Properties  Assigning Properties to Frame Elements  Assigning Properties to Area Elements  Assign Restraints  Assigning Fixed, Pinned, Roller Support at Joints  Define and Assign Load Cases  Adding and Assigning Dead Load Case  Adding and Assigning Live Load Case  Add rig and Assigning Wind Load Case  Adding and Assigning Seismic Load Case  Defining Load Combinations  Adding different Load Combinations for dead Load, Live Load, Wind Load and Seismic Load  View Analysis Results in Tabular Form  View Analysis Result Diagrams of Frame Elements  View Analysis Result Contour in Slab Panels  Concrete Design  Concrete Frame Design and View Design Results  Steel Design  Steel Frame Design and View Design Results  View Design Parameters  View Load Combination for Concrete Frame Design  View Reinforcement for Frame Design  View Percentage Steel for Frame Design  Steel Frame Design and View Design Results  View Load Combination for Steel Frame Design.Detailed Syllabus For Response Spectrum Analysis & Design of G+9 Residential Building:-1. Defining RSA functions. 2. Manual calculation of sa/g acceleration values 3. Creating Dynamic loads. 4. Creating Dynamic modal cases. 5. Perform RSA Analysis & Scale factor correction of static & Dynamic base reactions. 6. Correcting story deflections, drifts, and story torsional effects in modal by shear wall or bracings insertion. 7. Performing structural design

Overview

Section 1: PRACTICAL ETABS TRAINING G+9 BUILDING WITH RSA ANALYSIS

Lecture 1 Introduction

Lecture 2 Modelling Of G+9 Residential Building-1

Lecture 3 Modelling Of G+9 Residential Building-2

Lecture 4 Modelling Of G+9 Residential Building-3

Lecture 5 Modelling Of G+9 Residential Building-4

Lecture 6 Modelling Of G+9 Residential Building-5

Lecture 7 Modelling Of G+9 Residential Building-6

Lecture 8 Modelling Of G+9 Residential Building-7

Lecture 9 Modelling Of G+9 Residential Building-8

Lecture 10 Frame Design -1

Lecture 11 Frame Design -2

Lecture 12 Frame Design -3

Lecture 13 Frame Design -4

Lecture 14 Frame Design -5

Lecture 15 Frame Design -6

Lecture 16 Frame Design -7

Lecture 17 Frame Design -8

Lecture 18 Frame Design -9

Lecture 19 Frame Design -10

Lecture 20 Frame Design -11

Lecture 21 Frame Design -12

Lecture 22 Frame Design -13

Lecture 23 Slab Design

Lecture 24 Shearwall Design

Lecture 25 SMRF Frame Design Concepts

Lecture 26 Exporting Etabs results to RCDC-1

Lecture 27 Exporting Etabs results to RCDC-2

Lecture 28 RESPONSE SPECTRUM ANALYSIS-1

Lecture 29 RESPONSE SPECTRUM ANALYSIS-2

Lecture 30 RESPONSE SPECTRUM ANALYSIS-3

Lecture 31 RESPONSE SPECTRUM ANALYSIS-4

Lecture 32 RESPONSE SPECTRUM ANALYSIS-5

Lecture 33 RESPONSE SPECTRUM ANALYSIS-6

Lecture 34 RESPONSE SPECTRUM ANALYSIS-7

Entrepreneurs,Site Engineers,Design Engineers,Engineering Students,Architects,Builders/Promoters,Construction Engineers,Quantity Surveyors,QA/QC Engineers,Project Managers,Draftsmen,Project Engineers,Planning Engineers

Homepage


13framedesign4sfcc9w.jpg















 
Python GUI Master Class with Tkinter: Create 25 Python GUIs

47967109927m1cjv.jpg


Python GUI Master Class with Tkinter: Create 25 Python GUIs
Published 09/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 139 lectures (18h 56m) | Size: 8.2 GB

Learn how to make GUIs in Python with Tkinter library and start making your own Python GUI applications Today!



What you'll learn
Learn GUI from the basics
Be familiar with tkinter widgets
How to translator text in multi-language
Handle Keyboard and Mouse Events
Learn how to draw different shapes on canvas
Add tabs and a Menu in your Tkinter application
Create 2D animation
Buld Audio/Video Player
Learn Text Reader/PDF Reader, QR Code Generator and Reader
Learn how to use pygame, vlc, qrcode, ect.. python packages
How to read data from CSV & Text files
How to get live data from Internet( Web Scrapping)
20+ GUI Applications
5+ GUI Games


Requirements
You should have a basic understanding of the Python Programming Language.
A computer system with an internet connection


Description
Welcome to the "Python GUI Master Class with Tkinter: Create 25 Python GUIs" course, a course that will give you enough confidence to make GUI Applications and games in python.

Till now you were just aware of running python script on boring command prompt/terminal, now let's make GUI Applications with python, let's utilize your python coding skill to make awesome GUI Applications.

I will give you step-by-step guidance to make sure you are able to make any GUI Applications on completing this course. I will start by helping you to get your setup done, which includes Python, pip, and, PyCharm IDE installation, we will install the required python packages as and when needed.

We will go through all the GUI widgets

MainWindow

PhotoImage

Label

Entry

Button

messagebox

Checkbutton

Radiobutton

Scale

Listbox

colorchooser

Text

filedialog

Menu

Frame

Toplevel

Progressbar

Canvas

Scrollbar

ScrolledText

ComboBox

TreeView

Spinbox

LabelFrame

Menubutton

Separator

Sizegrip

tkcalendar

tkPDFViewer

CheckboxTreeview

And many more...

Then we are going to learn how to catch events.

Key Events from the keyboard

Mouse events

Not only that but we are going to learn how to use many python packages.

vlc to play video files

pygame to play audio files

timedelta to convert time in hh:mm:ss format

package to work with pdf files

package to do zip/unzip

package to resize any image

translate for multi-language translation

BeautifulSoup for web scraping

qrcode to with QR Code

gTTS for Text to Speech

random to generate a number randomly

and many more

Along the course, we will many applications and games.

Applications

App - 01: Digital Clock & Calendar

App - 02: Color Picker

App - 03: Image Viewer/Resizer

App - 04: Multi-Language Translator

App - 05: Morse Code Translator

App - 06: Calculator

App - 07: To-Do List

App - 08: Make Your Own Dictionary From The Internet

App - 09: Sensex Nifty Live Data From Internet

App - 10: QR Code Generator

App - 11: QR Code Reader

App - 12: PDF Viewer

App - 13: TextReader With Font Customization

App - 14: Text To Speech Converter

App - 15: AudioPlayer

App - 16: Video Player

App - 17: Zip/Unzip Files & Folders

App - 18: Alarm Clock

App - 19: Wish a Special Day to a Special One without a Fail

App - 20: Quiz App

Games

Game - 01: Rock paper scissors

Game - 02: tic tac toe

Game - 03: Color ball finder

Game - 04: Make an image from the image part

Game - 05: Flip a Card ( Card pair)

You will get lifetime access to all the lectures.

Best of all, we will learn by actually DOING IT! As the course name suggests you will master yourself in making GUI applications in Tkinter with python by making 20+ applications, and we will also make 5+ GUI games.

Enroll Now and let's start making creative and useful python GUI Applications.

I will see you on the course!

Who this course is for
All level Python GUI Developer
Beginner Python Developers who want to build Awesome GUI Applications & Games
Python Developer who want to use interactive UI instead of terminal
Students who want to build portfolio of 25+ Python GUI Application/Games

Homepage


3.part02integratethef8rfr4.jpg









 
CBTNuggets - CWNP Certified Wireless Network Administrator - CWNA-108 - CWNP Certification Training

cwnackniob.png


CBTNuggets - CWNP Certified Wireless Network Administrator - CWNA-108 - CWNP Certification Training
Released 09/08/2022
MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 273 Lessons (37h 58m) | Size: 31 GB

This entry-level Certified Wireless Network Administrator training covers the objectives in the CWNA-108 exam, which is the one required exam to earn the Certified Wireless Network Administrator certification

For any network administrator whose career involves a focus on wireless technologies -- or may some day, Certified Wireless Network Administrator is the perfect certification. The CWNA cert is provided by Certified Wireless Network Professionals, and after taking the CWNA-108 exam, you'll know your way around every technology, device and problem a wireless network could throw at you.

All of CWNP exams are vendor-neutral, which means you're not focusing on a particular brand or manufacturer, but on 802.11 technology. This is a huge plus for any administrator eager to learn about wireless technology generally rather than specific products.

For anyone who manages a wireless network, this wireless training can be used for CWNA-108 exam prep, onboarding new network administrators, individual or team training plans, or as a reference resource.

Certified Wireless Network Administrator: What You Need to Know
This Certified Wireless Network Administrator training covers CWNA-108 WLANs exam objectives, including these topics

Understanding radio frequency (RF) technologies and essentials
Recognizing WLAN regulations, standard protocols, and devices
Best practices for WLAN network architecture and design
Enforcing WLAN security
Troubleshooting and optimizing WLANs

Who Should Take Certified Wireless Network Administrator Training?
This Certified Wireless Network Administrator training is considered professional-level training, which means it was designed for network administrators with at least a year of experience with wireless network administration and experienced network administrators looking to validate their skills.

New or aspiring network administrators. If you're new to network administration, you should prepare yourself for the constant process of staying familiar with technologies. Sometimes, vendor-specific certifications will help you make the most out of one particular device or network. But at the start of your career, a vendor-agnostic certification like the Certified Wireless Network Administrator can give you a wide foundation from which to build a career in any direction you like.

Experienced network administrators. If you're a network administrator with several years of experience under your belt, the information on the CWNA-108 might already be familiar to you. On the other hand, if you haven't spent a lot of time with wireless networks, or you've continually figured things out by the seat of your pants, this Certified Wireless Network Administrator training can help put a stronger foundation under your feet and prepare you for more advanced wireless network administration.

Homepage


65.802.11nwifi4sosc4c.jpg
























 
Udemy - Corporate Finance

3402012cc91v3cn0.jpg


Udemy - Corporate Finance
Last Update: 5/2022
Duration: 163h 29m | Video: .MP4, 1280x720 30 fps | Audio: AAC, 48 kHz, 2ch | Size: 71.9 GB
Genre: eLearning | Language: English

Learn corporate finance from a practicing CPA Certified Public Accountant



What you'll learn:
List corporate finance topics and understand them in a comprehensive way
Have a comprehensive corporate finance recourse to use as a reference in future endeavors
How to read & analyze financial statements
How to read & analyze financial statements
How to use Excel or Google Sheets to work many practice problems
List common financial ratios, understand how they are used, and calculate them
Create forecasts and and budgets
Explain what break-even analysis is, how it is used, and how to perform calculations
Understand how to make financing decisions
Be able to apply management of current asset concepts to run a more efficient operation
List issues related to short term financing and make short term financing decisions
Understand time value of money concepts
Know when to apply time value of money principles
Be able to calculate present value and future value using multiple methods
Calculate the valuation of bonds
Calculate the valuation of preferred stock
Calculate the valuation of common stock
Explain the concept of cost of capital and apply it to debt and equity financing
Describe to make long term capital budgeting decisions using time value of money concepts
Calculate net present value (NVP)
Calculate internal rate of return (IRR)
Describe what capital markets are and how the can be used by a corporation
Explain what investment banking is and how it can be useful to a corporation
Be able to make long term debt and lease financing decisions
Define dividends and understand how to make corporate dividend policy
Define convertible bonds and analyze them impact of them to the company and to investors
Explain what mergers and acquisitions are and common issues related to them
Understand how foreign currency transactions can impact financial decisions
Calculate foreign currency exchanges
Explain what forward contracts are and how they can be used


Requirements
None - This course starts from the beginning and continues. . . . . . . . . for a comprehensive look at the topic


Description
We will learn how to read financial statements and how to use them for decision making.
A primary tool we will use is ratio analysis. Ratio analysis is a very useful skill in a wide area of topics, and financial analysis is a great place to learn the skill.
Ratios are necessary when measuring performance, including most any job performance. For example, we must apply ratio analysis when measuring the job performance of sports athletes. Similar ratio analysis will apply to most any job performance, and also apply to the performance of corporations.
Once we analyze the past performance of a corporation, we can use this knowledge to predict future performance, helping us make decisions about the company, whether those decisions be investment-related, creditor related, or managerial.
This course will include many example problems using both a presentation format and a spreadsheet format.
Corporate finance is a wonderful tool to learn, improve, and practice Excel or Google Sheets spreadsheet skills. Every spreadsheet practice problem will include a downloadable Excel file, that can be opened with Google Sheets, containing at least two tabs, one with the answer, the other with a preformatted worksheet to be filled in along with a step by step instructional video.

Who this course is for
Finance Professionals
Finance Students
Business Owners
Anybody who wants to understand financial concepts and have a reference tool for them

Homepage

1.305ratioanalysisintkmdpw.jpg
















































 
Coursera - Genomic Data Science Specialization

gbds87dv8.jpg


Coursera - Genomic Data Science Specialization
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English + srt | Duration: 31h 40m | Size: 7.4 GB

Be a next generation sequencing data scientist.. Master the tools and techniques at the forefront of the sequencing data revolution.

WHAT YOU WILL LEARN
Next generation sequencing experiments

Genomic technologies

DNA, RNA and epigenetic patterns

Genome analysis

SKILLS YOU WILL GAIN
Bioinformatics
Statistics
Data Science
Computational Biology
Biopython
Python Programming
Genomics
Bioinformatics Algorithms
Algorithms
Algorithms On Strings
Samtools
Unix

About this Specialization
25,446 recent views
With genomics sparks a revolution in medical discoveries, it becomes imperative to be able to better understand the genome, and be able to leverage the data and information from genomic datasets. Genomic Data Science is the field that applies statistics and data science to the genome.

This Specialization covers the concepts and tools to understand, analyze, and interpret data from next generation sequencing experiments. It teaches the most common tools used in genomic data science including how to use the command line, along with a variety of software implementation tools like Python, R, and Bioconductor.

This Specialization is designed to serve as both a standalone introduction to genomic data science or as a perfect compliment to a primary degree or postdoc in biology, molecular biology, or genetics, for scientists in these fields seeking to gain familiarity in data science and statistical tools to better interact with the data in their everyday work.

To audit Genomic Data Science courses for free, visit click the course, click Enroll, and select Audit. Please note that you will not receive a Certificate of Completion if you choose to Audit.

Homepage


03alignmentsequenceva5tcbx.jpg









 
2022-Master in Core Python Programming in 99 Days

4253034ec1a6oeeg0.jpg


2022-Master in Core Python Programming in 99 Days
Last Update: 9/2022
Duration: 30h 38m | Video: .MP4, 1280x720 30 fps | Audio: AAC, 48 kHz, 2ch | Size: 11.6 GB
Genre: eLearning | Language: English

Learn Python Programming in 99 Days with Theoretical concepts, Practical, Examples, Assignments, Problems & Solution etc



What you'll learn:
You will be 100% Cleared, How to work with Python Properly
At the end of Course, you will become a Python Developer, just need to do practice
You will learn, How to solve Real World Problems using Python Coding
You will learn Complete Core Python topics as Basics, Operators, Data Types, Flow Control, Functions etc
You will learn, how to Create a Project in Python for your practice
You will get Python related Assignments and Tasks for your Programming Improvement
You will get Special Support, if you face any issue while Learning with us
You will be able to solve Real World Problems, if you do hard work and if you cleared topics as we discussed in this master Python programming course
You will learn how to Create and Execute Python files in Different Methods


Requirements
There is no prerequisite for learning Python but it is best to have already knowledge of programming language as data types, variables, if-else, loops, function, etc


Description
Learn Python Programming in 99 Days with Theoretical concepts, Practical, Examples, Assignments, Problems & Solution etc
What you will get in this course Regularly!
Video Lectures
Source Code
Notes
Assignments
Special Support
Course for those, who are interested to become a successful Python Developer
Python which is developed by Guido van Rossum, which is the general-purpose programming language that is used to create any kind of software using its powerful and standard libraries.
There is a number of standard libraries that are developed with Python you can work with any field to get required functionalities like in Web development, AI, ML, Data Science, Data analytics, etc.
I created this course (Faisal Zamir -- JafriCode) which contains everything related to Python from introduction to Python to creating an application with Python and providing home assignments to all students. The different topics as Installation & setup, Basic Python Syntax, Variables & Constant, If else, Loops, functions, list, tuple, dictionary, date and time, creating applications, etc.
At the end of this course, you will have cleared all topics related to Python.
You will be able to enter any field of Python like web development, Data Science, AI, Data Analytics, etc after this course, but Condition is that you should have to work with me as I taught you in video lectures.
If you do practice then you will be selected in any field to get admission (like Web Development, Artificial intelligence, Data Science, Data Analytics, etc).
Because we do hard work to create this course which has a lot of examples, questions, and assignments that enable you to improve your programming skills.
Thank you!
Best Regards
Faisal Zamir

Who this course is for
The Master in Python Programming course is for those interested students who want to become a good Python Developer

Homepage

2.ifelifelsestatementl4ch9.jpg












 
Node with React: Build & Deploy a Fullstack Web Application

486355047a811lyf2w.jpg


Node with React: Build & Deploy a Fullstack Web Application
Published 09/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 552 lectures (87h 43m) | Size: 41.6 GB

Build & deploy a social network app using React, Typescript, MongoDB, Redis, Queues, AWS, Terraform, CircleCI & more



What you'll learn
Build a MERN (MongoDb, Express, React, Node) fullstack app
Build an amazing social network application
Define Infrastructure as Code using Terraform to easily create and destroy environment
Setup Continuous Integration/Delivery Pipeline
Integrate Terraform into CI/CD Pipeline
Deploy full-scale application to AWS
Use Redis for caching
Setup Redis message queues and workers
Learn to write unit tests for Frontend and Backend apps
User AWS services like VPC, subnets, internet gateways, EC2, route53, elasticache, S3, cloudfront, load balancer, autoscaling group and much more.
Setup Online Dev, Staging and Production Environments
Integrate Slack in the CI/CD Pipeline
Build custom react hooks
Setup redux-toolkit


Requirements
Just basic JavaScript knowledge
No prior React knowledge is required
No prior Backend Development knowledge required
No prior DevOps knowledge required


Description
React is one of the most popular library's for building client apps with HTML, CSS and JavaScript. If you want to establish yourself as a front-end or full-stack developer, you need to learn React.

This course follows a hands-on approach or 'learn-by-doing, which means the whole course is structured around building a fullstack web application and the different concepts will be explained detailedly as they are introduced.

What's this course about?

This course is about building a complete fullstack web application from scratch using popular development tools. The curriculum for this course is going to be very hands on as we walk from start to finish building and deploying the application to production. The course is structured into 2 main parts

Development (Backend and Frontend)

Deployment (Infrastructure setup on AWS and CI/CD)

Each structure is broken down into its sections.

Backend development

Backend deployment

Frontend development

Frontend deployment

Students can go through all the sections or just the sections they are most interested in.

What Technology You'll Use

We are building a real-time fullstack application with Continuous integration/delivery and automatic deployment, we'll use a variety of technologies.

Development

React

Redux-toolkit

NodeJS

Typescript and Javascript

Redis

MongoDB and Mongoose

Message queues

SocketIO

Jest for unit test

Cloudinary for image upload

Nodemailer and Sendgrid mail

and much more...

Infrastructure Setup and Deployment

Terraform

AWS

CircleCI

Numerous AWS resources will be used. Some of those resources are

- VPC and subnets

- Internet gateways

- Route tables

- NAT gateways and elastic ips

- Security groups

- Load balancers

- Autoscaling groups

- EC2 instances

- Route53

- S3

- Code deploy

- Elasticache for redis clusters

- and much more

Not familiar with some of these? No problem! This course will guide you on how to setup and use these technologies in your apps.

What You'll Be Able to Do

By the time you complete this course or one of the sections you are interested in, you'll be able

Build a real-time fullstack application

Setup unit tests in both your React application and NodeJS backend application

Setup CI/CD Pipeline

Setup Automatic Deployment

Create AWS Resources using Terraform

Integrate Terraform into CircleCI Pipeline

Setup Multiple Online Environments (Dev, Staging and Production)

Use GitHub w/ CircleCI

Use Feature Branches on GitHub

Write unit tests

Create Custom React Components

Setup Redux-toolkit

And More...

Who this course is for
Suitable for both beginners and intermediate React developers
Junior developers looking to enhance their skills
Web developers and Front End Developers who want to get into the backend development world or become Fullstack Developers
Frontend or Backend developers who wants to get into the world of cloud infrasttucture with AWS

Homepage


16.updatemessagesinmo58ctx.jpg






























 
CompTIA IT Fundamentals Exam FC0-U61 Simplified

48774060c2122ii3y.jpg


CompTIA IT Fundamentals Exam FC0-U61 Simplified
Published 9/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 7.14 GB | Duration: 5h 58m

Pass Your IT Fundamentals on the First Try with this Hand-on interactice class



What you'll learn
Pass the CompTIA IT Fundamentals Certification Exam
Understand the basis of how a computer work
Understand basic hardware and software configuration
Understand basic cybersecurity concepts

Requirements
None

Description
CompTIA IT Fundamentals is a great certification to get when you start your career in IT. This course will cover all of the objectives to pass the current IT Fundamentals exam, FC0-U61. In this course instructor Andrew Ramdayal will teach all the topics in a fun and interactive manner. This will many hands-on labs to show how the technology will work in real life. This course will cover the following topics:IT Concepts and terminology. This includes learning basic IT terminology such what is the difference between binary systems and decimals. Systems hardware management. Students will be shown all of the components needed to have a computer working. Networking management. This section will all of the networking devices and how they function. Operating systems and applications management. This section will review commonly used tools and terminology will installing and supporting major operating systems such as Windows or MAC. Basic software development. Students will learn the difference between some of the most popular programming languages in the world and how to read basic codes. Basic database management. Students will learn what databases are, and how they are structured.Cybersecurity concepts. Students will the basics of IT security and how organizations are staying protected on the internet. This course is by instructor Andrew Ramdayal who holds over 60 IT certifications and has taught over 150,000 students a wide range of classes including project management, networking, IT security, and systems administration.

Overview

Section 1: Introduction

Lecture 1 About Me

Lecture 2 Exam Info

Lecture 3 Exam Domains

Section 2: IT Concepts and Terminology

Lecture 4 Numbering system

Lecture 5 Data Representation ASCII

Lecture 6 Boolean

Lecture 7 Basics of computing and processing

Lecture 8 Value of data and information

Lecture 9 Intellectual property

Lecture 10 Storage Unit

Lecture 11 Throughput unit

Lecture 12 Processing speed

Lecture 13 Troubleshooting methodology

Section 3: Infrastructure

Lecture 14 Basic Networking

Lecture 15 Peripheral device

Lecture 16 Graphic devices

Lecture 17 Other Devices

Lecture 18 Installation Types

Lecture 19 CPU's

Lecture 20 GPU's and cooling

Lecture 21 Internal computing components

Lecture 22 Storage devices

Lecture 23 NIC

Lecture 24 Internet connections

Lecture 25 Network Storage

Lecture 26 common computing devices

Lecture 27 IoT Devices

Lecture 28 LAN vs. WAN

Lecture 29 Basics of packet transmission

Lecture 30 IP vs Mac Address

Lecture 31 URL to IP addresses

Lecture 32 Web and Mail Protocols

Lecture 33 Network Devices

Lecture 34 Wireless Networking

Section 4: Software Management

Lecture 35 Operating Systems and functions

Lecture 36 File systems

Lecture 37 Folders and file management

Lecture 38 Operating systems utilities

Lecture 39 Types of Software

Lecture 40 Application Installations

Lecture 41 Configuration of web browsers

Lecture 42 Software Licensing

Section 5: Software Development

Lecture 43 Programming languages

Lecture 44 Programming Logic

Lecture 45 Basic programming concepts

Lecture 46 More programming concepts

Section 6: Databases

Lecture 47 Purpose and concepts of a Database

Lecture 48 Database Structure

Lecture 49 Database Commands and access methods

Section 7: Cybersecurity

Lecture 50 CIA in Security

Lecture 51 Devices Best Practices

Lecture 52 Behavioral security concept

Lecture 53 Authentication

Lecture 54 Authorization, Accounting and Non-Repudiation

Lecture 55 Passwords

Lecture 56 Encryption

Lecture 57 Disaster Recovery

Anyone looking to enter the world of Information Technology.

Homepage


17otherdevicessv1do9.jpg









 
Coursera - Data Mining Specialization

dataminingspecializatfnep9.jpg


Coursera - Data Mining Specialization
Released 09/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English + srt | Duration: 31h 26m | Size: 7.7 GB

Analyze Text, Discover Patterns, Visualize Data. Solve real-world data mining challenges

SKILLS YOU WILL GAIN
Data Clustering Algorithms
Text Mining
Data Visualization (DataViz)
Data Mining
Data Visualization Software
Tableau Software
Data Virtualization
Information Retrieval (IR)
Document Retrieval
Machine Learning
Recommender Systems
Probabilistic Models

About this Specialization
10,458 recent views
The Data Mining Specialization teaches data mining techniques for both structured data which conform to a clearly defined schema, and unstructured data which exist in the form of natural language text. Specific course topics include pattern discovery, clustering, text retrieval, text mining and analytics, and data visualization. The Capstone project task is to solve real-world data mining challenges using a restaurant review data set from Yelp.

Courses 2 - 5 of this Specialization form the lecture component of courses in the online Master of Computer Science Degree in Data Science. You can apply to the degree program either before or after you begin the Specialization.

Homepage


0625fpgrowthapatterngsrd2w.jpg









 
Personal Finance #4-Credit: Sources, Costs, Pros & Cons

ncdgiorsygeabir8w4ypbrndyf.jpg


Personal Finance #4-Credit: Sources, Costs, Pros & Cons
Published 9/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 5.15 GB | Duration: 7h 41m

Learn about debt and credit related, personal finance decisions, from a Certified Public Accountant (CPA)



What you'll learn
Describe and define credit
List and explain credit advantages and disadvantages
Understand closed end credit and open end credit
List different loan types and describe their pros and cons
List types of financial institutions and explain their pros and con
List and explain the 5 C's of credit history
Explain the Equal Credit Opportunity Act (ECOA)
Describe loan components and the trade offs of them
Calculate different interest calculation methods
List and identify debt problem warning signs

Requirements
None

Description
This course will focus on tools to help with personal financial decisions related to debt and credit.Learners will understand the advantages and disadvantages of using credit, as well as the associated costs of using credit.We will discuss credit-related terms like closed-end credit, open-end credit, and different loan types. Learners will also understand what financial institutions are, the differences in how different types of financial institutions operate, and which financial institutions may be best for their personal debt-related needs.The course will cover factors that generally have an impact on an individual's ability to access credit, including the 5 C's of credit capacity:1. Character2. Capacity3. Capital4. Collateral5. ConditionsLearners will learn about the equal credit opportunity act (ECOA). We will also discuss options for an individual if denied credit.The course will discuss credit costs, loan components, and trade-offs when making credit-related decisions.We will also look at interest calculation methods, a critical topic for understanding personal financing and making beneficial financial decisions.The course will include example problems to make concepts more concrete.It will also have practice problems, including downloadable Excel Workbooks, which users may also open using Google Sheets.The Excel Workbooks will generally have at least two tabs. One tab will have the answer key so learners can deconstruct the problem. The second tab is where we work the practice problem step-by-step along with the instructional videos.

Overview

Section 1: Presentations

Lecture 1 5100 Consumer Credit Overview

Lecture 2 5110 Credit Advantages & Disadvantages

Lecture 3 5115 Closed-End Credit vs Open-End Credit

Lecture 4 5120 Loan Types & Institutions Commercial Banks

Lecture 5 5125 Loan Types & Institutions Consumer Finance Companies

Lecture 6 5130 Loan Types & Institutions Credit Unions

Lecture 7 5135 Loan Types & Institutions Life Insurance Companies

Lecture 8 5140 Loan Types & Institutions Federal Savings Bank

Lecture 9 5145 Loan Options by Expense Level

Lecture 10 5150 5 C's of Credit Credit History

Lecture 11 5155 Credit Scores & How They're Calculated

Lecture 12 5160 5 C's of Credit Capacity

Lecture 13 5165 5 C's of Credit - Collateral

Lecture 14 5170 5 C's of Credit Capital

Lecture 15 5175 5 C's of Credit Conditions

Lecture 16 5180 Equal Credit Opportunity Act (ECOA)

Lecture 17 5190 Options if Denied Credit

Lecture 18 5195 Cost of Credit

Lecture 19 5200 Loan Components and Trade Offs

Lecture 20 5210 Interest Calculation Methods

Lecture 21 5215 Credit Billing Error & Disputes

Lecture 22 5220 Credit & What to do if Identity is Stolen

Lecture 23 5225 Protecting Your Credit From Theft or Loss

Lecture 24 5230 Cosigning a Loan

Lecture 25 5235 Debt Problem Warning Signs

Lecture 26 5240 Financial Counseling Services

Lecture 27 5250 Declaring Personal Bankruptcy

Section 2: Problems

Lecture 28 5110 Home Loan Borrowing Limit

Lecture 29 5122 Debt Payments to Income Ratio

Lecture 30 5162 Calculate APR and Payment Home Loan

Lecture 31 5163 Mortgage Rate (APR) Break Even Point

Lecture 32 5171 Pay Period Comparisons

Lecture 33 5175 APR Simple Interest Examples

Lecture 34 5177 APR Two Installment Loans Comparison

Lecture 35 5179 Add on Interest Rate Loan

Section 3: Excel Problems

Lecture 36 5110 Home Loan Borrowing Limit

Lecture 37 5122 Debt Payments to Income Ratio

Lecture 38 5162 Calculate ARP and Payment Home Loan

Lecture 39 5163 Mortgage Rate (APR) Break Even Point

Lecture 40 5171 Pay Period Comparisons

Lecture 41 5175 APR Simple Interest Example

Lecture 42 5177 APR Two Installment Loans Comparison

Lecture 43 5179 Add on Interest Rate Loan

Individuals,Personal finance professionals

Homepage


295122debtpaymentstoif3c1p.jpg









 
Zurück
Oben Unten