Chemical/Process Safety Engineering: BOOTCAMP 2021
Video: .mp4 (1280x720, 30 fps(r)) | Audio: aac, 44100 Hz, 2ch | Size: 1.68 GB
Genre: eLearning Video | Duration: 32 lectures (5 hour, 2 mins) | Language: English
The only course with over 5 hours practical knowledge about the Process Safety and Overpressure Protection combination
Importance of Process Safety
Hazard-Risk Combination
Qualitative and Quantitative Risk Assessment Techniques
Hazard Scenarios and Failure Modes
Consequence & Likelihood Analysis and Modelling
Types of Fire and Explosions
Principles of Fault/Tree Analysis
Definition of Risk (Risk matrix)
Inherent Safety
Plant Layout and Protective Systems
Bowtie diagram in Process Safety Management
Process Safety for Operational Discipline
Process Safety Performance
Implementation of Relief Devices
Design Philosophies and Methods
Relief Scenarios
Single-phase and Multi-phase Relief Sizing
Segregation in venting and flare systems
Depressurisation
Requirements
There are no pre-requesites for this course. The fundamental and solid background will be delivered to the course takers.
Description
Chemical/Process Safety Engineering BOOTCAMP provided by Velocis Solutions aims to deliver practical and useful information set for course takers. The course bundle includes three separate courses of Process Safety Fundamentals, Process Safety in Engineering and Operations and Overpressure Protection.
The course structure is designed by considering your approach and level about the topic, that is why you can commence the course with getting introduction to Process Safety Fundamentals. In this first section, you can directly get into the risk management process and comprehend the necessary steps to define risk within the practical sessions, such as
Importance of Process Safety
Hazard, Risk, Hazard Identification
Qualitative Risk Assessment
Hazard Scenarios
Consequence Analysis and Modelling
Types of Fires and Explosions
Likelihood Analysis and Fault & Event Tree Analysis (FTA)
Defining Risk and Risk Matrix
After forming the solid background about Process Safety discipline, you can give a turn to the second section where you will be given with the implementation of Process Safety in Engineering and Operations by focusing on the risk management process and following chapters
Inherently Safer Design
Bowtie Diagram and Protective Systems
Plant Layout
Introduction to Safety in Operations
Process Safety Performance
More practical section, Overpressure Protection will welcome you, after you have completed the first two sections where the course takers can take the huge benefits of the best practical knowledge that was proposed by referring to API standards. The valuable source of information is delivered to course takers by going over the section through
Introduction to the course and documentation (API Standards)
Design Philosophies and Methods
Relief Scenarios and Scenario Selection
Types of Relief Devices, Conventional Spring Loaded, Balanced Bellow, Pilot Operated
Single-phase and Multi-phase Flow Relief Sizing
Relief Device Installation, Calculation of Blow-down Orifice
Segregation in Flare and Venting Systems
Flare Header Design
Emergency and Operational Depressurisation
Who this course is for
Chemical Engineers
Lead Operators
Mechanical and Reliability Engineers
Manufacturing Engineers
Chemists
Instrumentation and Automation Engineers
EHS Specialists
Students
Screenshots
