Hallo Leute sorry wenn ich das hier Frage was sonst nicht genau wo sonst. Kann mir jemand helfen bei der Installation von Solidworks 2025. Bin zu doof dafür. Meine das ich mich voll und ganz an die beschreibung halte aber funktioniert einfach nicht. Danke im voraus. Gruß Thorsten
Vieleicht hat jemand zeit und lust und könnte mir da unter die Arme greifen. Oder hat es auch auf seinem rechner istalliert. werde dei Text Datei mal mit hier rein kopieren.
001. If you want to install several versions of SolidWorks on one computer, you must comply with the following conditions:
1. You must install SolidWorks_Flexnet_Server from the crack of the highest version of the SolidWorks being installed
2. Each version of SolidWorks and its Toolbox Browser must be installed in a separate folders
Suppose you want to install versions 2025, 2020 and 2010 - then,
for SW 2025 and SW 2025 Toolbox Browser you can select, for example, the folders D:\SolidWorks\v2025 and D:\olidWorks Data\v2025
for SW 2020 and SW 2020 Toolbox Browser you can select, for example, the folders D:\SolidWorks\v2020 and D:\olidWorks Data\v2020
for SW 2010 and SW 2010 Toolbox Browser you can select, for example, the folders D:\SolidWorks\v2010 and D:\olidWorks Data\v2010
ans so on..
002. Before installation, block the outgoing Internet access by means of Windows
Firewall or cord plug. Check .NET Framework 3.5 and 4.0 are installed. If
.NET Framework 3.5 (including 2.0) is not installed, go to
"Control Panel" -> "Programs and Features" -> "Turn Windows features on or off" ->
-> select ".NET Framework 3.5 (including 2.0)"
003. Uninstall (if exist) SolidWorks_Flexnet_Server from SSQ's releases of previous version of SolidWorks!
To do it run as Administrator SolidWorks_Flexnet_Server\server_remove.bat
and wait until service "SolidWorks Flexnet Server" will be removed
After that delete SolidWorks_Flexnet_Server folder from computer
1. Run "sw2025_network_serials_licensing.reg" and confirm to add info
into Windows Registry
2. Copy folder "SolidWorks_Flexnet_Server" to C: , run as Administrator
"SolidWorks_Flexnet_Server\server_install.bat" and wait until new service
"SolidWorks Flexnet Server" will be install and started
3. Run SolidWorks 2025 setup
If select to "Install server components" > SOLIDWORKS PDM Server- do not install
SolidNetwork License Manager!
When asked of License Server definition input: 25734@localhost
3.1 If the System Check Warning window appears, ignore it (click Next to continue)
3.2 If the warning "SolidWorks Serial number was not found in activation database"
appears, ignore it (click OK to continue)
3.3 Click "Select different package" and tick option
"Select products not included in this package"
3.4 Select SW products to be installed
3.5 If the "The Installation Manager was unable to determine the current subscription
expiration date. Would you like to reactivate your license to update this information?"
appears, press No and press Yes in "Do you want to do it later?" prompt.
4. After end of setup
4.1 Run Windows Task Manager > Details
Find (if exist) process "sldworks_fs.exe" > right mouse click > remove the task
4.2 Delete (if exist) file C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\netapi32.dll
4.3 Remane (if exist) file C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS PDM\StoredProcs.dll
to StoredProcs.dll.bak
4.4. Copy folders from crack folder "SOLIDWORKS Corp" on top of original ones in folder
C:\Program Files\SOLIDWORKS Corp\ (if folders with the same names exist)
5. Run "SolidSQUADLoaderEnabler.reg" and confirm to add info
into Windows Registry
6. REBOOT COMPUTER!
7. Start SolidWorks 2025
If in the splash window you see SOLIDWORKS/Standard instead of SOLIDWORKS/Premium run
Help > SolidNetWork License Manager > License Order > Reset > Apply > OK
Restart SolidWorks 2025
Vieleicht hat jemand zeit und lust und könnte mir da unter die Arme greifen. Oder hat es auch auf seinem rechner istalliert. werde dei Text Datei mal mit hier rein kopieren.
001. If you want to install several versions of SolidWorks on one computer, you must comply with the following conditions:
1. You must install SolidWorks_Flexnet_Server from the crack of the highest version of the SolidWorks being installed
2. Each version of SolidWorks and its Toolbox Browser must be installed in a separate folders
Suppose you want to install versions 2025, 2020 and 2010 - then,
for SW 2025 and SW 2025 Toolbox Browser you can select, for example, the folders D:\SolidWorks\v2025 and D:\olidWorks Data\v2025
for SW 2020 and SW 2020 Toolbox Browser you can select, for example, the folders D:\SolidWorks\v2020 and D:\olidWorks Data\v2020
for SW 2010 and SW 2010 Toolbox Browser you can select, for example, the folders D:\SolidWorks\v2010 and D:\olidWorks Data\v2010
ans so on..
002. Before installation, block the outgoing Internet access by means of Windows
Firewall or cord plug. Check .NET Framework 3.5 and 4.0 are installed. If
.NET Framework 3.5 (including 2.0) is not installed, go to
"Control Panel" -> "Programs and Features" -> "Turn Windows features on or off" ->
-> select ".NET Framework 3.5 (including 2.0)"
003. Uninstall (if exist) SolidWorks_Flexnet_Server from SSQ's releases of previous version of SolidWorks!
To do it run as Administrator SolidWorks_Flexnet_Server\server_remove.bat
and wait until service "SolidWorks Flexnet Server" will be removed
After that delete SolidWorks_Flexnet_Server folder from computer
1. Run "sw2025_network_serials_licensing.reg" and confirm to add info
into Windows Registry
2. Copy folder "SolidWorks_Flexnet_Server" to C: , run as Administrator
"SolidWorks_Flexnet_Server\server_install.bat" and wait until new service
"SolidWorks Flexnet Server" will be install and started
3. Run SolidWorks 2025 setup
If select to "Install server components" > SOLIDWORKS PDM Server- do not install
SolidNetwork License Manager!
When asked of License Server definition input: 25734@localhost
3.1 If the System Check Warning window appears, ignore it (click Next to continue)
3.2 If the warning "SolidWorks Serial number was not found in activation database"
appears, ignore it (click OK to continue)
3.3 Click "Select different package" and tick option
"Select products not included in this package"
3.4 Select SW products to be installed
3.5 If the "The Installation Manager was unable to determine the current subscription
expiration date. Would you like to reactivate your license to update this information?"
appears, press No and press Yes in "Do you want to do it later?" prompt.
4. After end of setup
4.1 Run Windows Task Manager > Details
Find (if exist) process "sldworks_fs.exe" > right mouse click > remove the task
4.2 Delete (if exist) file C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\netapi32.dll
4.3 Remane (if exist) file C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS PDM\StoredProcs.dll
to StoredProcs.dll.bak
4.4. Copy folders from crack folder "SOLIDWORKS Corp" on top of original ones in folder
C:\Program Files\SOLIDWORKS Corp\ (if folders with the same names exist)
5. Run "SolidSQUADLoaderEnabler.reg" and confirm to add info
into Windows Registry
6. REBOOT COMPUTER!
7. Start SolidWorks 2025
If in the splash window you see SOLIDWORKS/Standard instead of SOLIDWORKS/Premium run
Help > SolidNetWork License Manager > License Order > Reset > Apply > OK
Restart SolidWorks 2025
