Last updated 6/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 1.39 GB | Duration: 4h 33m
SOC, Static Timing Analysis, Synthesis, FPGA, Logic, ECOs, HDL, Digital Design, Clock Domain Crossing, Low Power Design
What you'll learn
Access to the best and hand picked ASIC/Digital Design Interview Questions
Prepare the audience in a well rounded manner such that the candidate is extremely confident going into the interviews
Detailed explanation of the tricks used to analyze and solve the complex Logic Design Questions which can be applied across many other similar problems
Multiple ways of designing circuits with pros and cons of each to make a lasting impression on the Interviewers
Requirements
The students should have taken at least one pre-requisite Digital/ASIC Design course and should have a good understanding for Flip Flops, Logic gates, Muxes, FIFOs, Memories, Static Timing, Synthesis, DFT, etc.
Description
Do you want access to all the questions that are asked at the Big Tech Companies? Do you want to feel supremely confident going into the interview process? Do you want to ACE all the interviews and get the best possible offer(s)?If your answer to any of these questions is "YES", then this course if for YOU!This course will expose you to a lot of Digital VLSI logic, design and architectural problems. This course will not only prepare you but also enhance your thought process when it comes to applying your knowledge to solve real world problems in the ASIC/ Digital Design world. Lot of System Verilog coding techniques which will help you understand how to use parameters and write RTL for scalability and reconfigurability which will help students differentiate themselves from competing candidates.The questions in this course will cover Microarchitecture, Design techniques, RTL coding, Power gating, Synthesis, UPF Flow, DFT, ECOs while keeping scaling and modular design in mind. It takes years in the industry to develop these design techniques and mindset.Lastly, the course will continue to evolve on a weekly basis. New lectures with latest questions and solutions will be added every week to help you keep up with the questions at the Big Tech companies.
Overview
Section 1: Introduction
Lecture 1 Introduction
Lecture 2 How The Course Will Evolve
Section 2: ASIC Design Concepts
Lecture 3 Async Vs. Sync Resets
Lecture 4 Do Async Resets Need Synchronization To Local Clk?
Lecture 5 What Is The Difference Between AHB & AXI
Lecture 6 What Happens If Blocking Assignments Are Used For Sequential Logic?
Lecture 7 How To Choose Between "Case" And "If-else" Statements?
Section 3: Logic Design Questions
Lecture 8 Design INV, AND & OR Gate Using 2:1 Mux
Lecture 9 Convert A D-FF Into A Toggle Flip Flop
Lecture 10 Design A Ckt To Delay The Falling Edge Of The Pulse By 2 Clock Cycles
Lecture 11 Design A "Transitions" Circuit
Lecture 12 Design A Leading '1' Detector Ckt For 8-bit Input Bus
Lecture 13 Design A Divide-by-3 Clk
Lecture 14 Design A Divide-by-3 Clk With 50% Duty Cycle
Lecture 15 Implement A 8-Bit Skip-By-3 Counter
Lecture 16 Design A Divide-by-2/3 Clk Circuit
Lecture 17 How To Fix Timing Violation Caused By A Very Late Signal?
Lecture 18 Calculate The FIFO Depth? (Burst Size Case)
Lecture 19 Calculate The FIFO Depth?
Lecture 20 Design A MinMax4 With MinMax2 Components
Lecture 21 Design A MinMax6 Circuit (Bonus Question)
Lecture 22 Design A Circuit With Minimum Logic?
Lecture 23 How Will You Exchange The Contents Of "X" And "Y"?
Lecture 24 Binary Or Gray: Which N-bit Counter Consumes More Power?
Lecture 25 Design A Ckt To Count The Number of 1's In A 7-bit Vector?
Lecture 26 Design A Ckt To Count The Number of 1's In A Bus
Lecture 27 Design A Random Delay Circuit Detector
Lecture 28 How Many Pattern Are Required To Detect A Wiring Mismatch?
Lecture 29 Implement A Fibonacci Sequence In System Verilog
Lecture 30 Design A Ckt To Count Rising Edges
Lecture 31 Design A Circuit To Count Rising And Falling Edges
Lecture 32 Design A Ckt To Detect Pattern 10110
Lecture 33 Clock Domain Crossing Implementation Gotcha-1
Lecture 34 How To Add A Soft Reset To DFF
This course is for students who want to thoroughly prepare for upcoming ASIC/Digital Design interviews at Tech companies and ACE these interviews!!!
Homepage
Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live
Links are Interchangeable - No Password - Single Extraction
