babymore87
MyBoerse.bz Pro Member
Free Download Machinery Specification, Datasheets & Vendor Evaluation
Published 8/2026
MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz
Language: English | Size: 2.68 GB | Duration: 3h 55m
API datasheets, enquiry packages, bid comparison, lifecycle cost, vendor document review and testing
What you'll learn
Complete an API machinery datasheet properly, field by field, and know who owns each column
Define duty as an operating envelope rather than a single point, and avoid the errors that cause rework
Build an enquiry package that produces genuinely comparable bids
Normalise and evaluate bids technically, and value the scope differences between them
Resolve conflicts between project, company, industry and vendor specifications
Manage clarifications and deviations, and recognise the ones that must be rejected
Build a lifecycle cost case covering capital, energy, maintenance and downtime
Run vendor document review and know what must be approved before manufacture starts
Plan manufacturing surveillance with meaningful hold and witness points
Take a machine through delivery, preservation, commissioning support and close-out
Requirements
No procurement or contracts experience is required - the purchasing sequence is built up from the start
Any engineering or technical background is enough to follow the course
No mathematics beyond arithmetic - the lifecycle cost work is a structured comparison, not an analysis
Helpful but not essential: access to a datasheet or specification from your own project to work against
No software or purchases needed - no standard needs to be bought to follow the course
Description
This course contains the use of artificial intelligence.▸ The machine is decided long before anyone sees it.By the time a compressor or a pump arrives on site, every consequential decision about it has already been made - in a datasheet, in a specification, in a clarification email, and in a bid evaluation nobody outside the project ever reads. The machine can only be as good as those documents were.Yet specification is the least taught skill in machinery engineering. Engineers are handed a blank API datasheet with columns they have never had explained, a specification hierarchy nobody has reconciled, and three bids that cannot be compared because each vendor has priced a different scope. The blanks get filled in, the cheapest compliant bid is recommended, and the consequences arrive two years later as an availability problem.This course teaches the whole sequence - defining the duty, completing the datasheet, building an enquiry package that produces comparable bids, evaluating technically and on lifecycle cost, and then holding the vendor to it through document review, manufacturing surveillance, testing and close-out.▸ The datasheet is a contract, not a formMost of this course is built around one idea: the datasheet is the contractual definition of the machine. Whoever fills in a field owns it, whatever is left blank becomes the vendor's choice, and every mandatory field left to a standard default is a decision made by absence. The course goes through the structure of an API datasheet section by section, including the fields most often left empty and what that omission costs.Bid evaluation is treated as an engineering exercise rather than a commercial one. Technical normalisation, scope differences and their valuation, efficiency differences over a twenty-year life, spares pricing, and the reasoning that shows why the more expensive machine is sometimes the cheaper one.Five focused sections, worked through in an afternoon.▸ What you will master• Define a machine duty properly - normal, rated and design conditions, and the operating envelope rather than a single point• Read and complete an API datasheet section by section, and know who owns the purchaser, vendor and as-built columns• Resolve a specification hierarchy - project, company, industry and vendor standards - and manage the conflicts between them• Build an enquiry package that produces genuinely comparable bids, with scope of supply and terminal points defined• Run a clarification and deviation process fairly, and recognise the deviations that must be rejected• Normalise bids technically and value the scope differences between them• Build a lifecycle cost comparison covering capital, energy, maintenance and downtime• Assess offered reliability and sparing philosophy as part of the machine selection• Run vendor document review, including what must be approved before manufacture begins• Plan manufacturing surveillance - inspection and test plans, hold and witness points, and what must be witnessed rather than certified▸ Who this course is for• Rotating equipment and machinery engineers writing specifications and completing datasheets• Project and package engineers managing machinery packages through enquiry, award and delivery• Mechanical and process engineers defining duty and reviewing vendor offers• Procurement and contracts engineers who need the engineering behind a technical recommendation• Commissioning and operations engineers who inherit whatever the specification allowed• Graduate and early-career engineers handed their first datasheet with no explanation of it▸ The work that decides how a project turns outSpecification work is invisible when it is done well and unmistakable when it is not. The engineer who can defend a technical recommendation with a lifecycle cost case, and who knows which vendor deviation to accept and which to refuse, becomes the person projects route their machinery through.▸ Why learn it hereTaught by a Chartered Engineer (CEng MIMechE) with over fifteen years delivering safety-critical projects in oil, gas and energy infrastructure - from the perspective of someone who has completed the datasheets, chaired the clarifications and lived with the result.Specification practice varies enormously between owners, projects and jurisdictions, and this course says so throughout. Where something is genuinely addressed by an API standard it is identified as such; where it is company practice, project philosophy or negotiation, that is said plainly rather than presented as a requirement.This course is independent training and is not affiliated with, endorsed by or accredited by API, ASME, ISO or any equipment manufacturer, and it does not reproduce datasheet forms or clause text from any standard.▸ What you get• Structured on-demand video across 20 focused lessons and five sections• Two FInal course exams• Lifetime access on mobile and TV, and a certificate of completion▸ No procurement experience is required - the specification and purchasing sequence is built up from the start, and any engineering or technical background is enough to follow the course.Enrol now and stop inheriting machines somebody else specified badly.
Rotating equipment and machinery engineers writing specifications and datasheets,Project and package engineers running machinery packages from enquiry to handover,Mechanical and process engineers defining duty and reviewing vendor offers,Procurement and contracts engineers who need the engineering behind a recommendation,Commissioning and operations engineers who inherit the result of the specification,Graduate engineers handed their first datasheet with no explanation of it
Homepage
Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live
No Password - Links are Interchangeable
