Electrical Design Masterclass From Beginner to Professional

[babymore87]

Electrical Design Masterclass From Beginner to Professional
Published 9/2026
Created by Sajjad Ansari
MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz, 2 Ch
Level: All Levels | Genre: eLearning | Language: English | Duration: 50 Lectures ( 15h 32m ) | Size: 7.7 GB

Master Electrical Design & Calculations with Load Calculation, Cable Sizing, Voltage Drop & SLD
What you'll learn
Understand the fundamentals of electrical design for MEP projects.
Perform practical electrical load calculations and determine connected and demand loads.
Design and calculate electrical systems including cable sizing, voltage drop, and circuit protection.
Prepare and understand Single Line Diagrams (SLD) and electrical distribution systems.
Design lighting and power distribution systems for real-world building projects.
Requirements
Basic knowledge of electrical engineering concepts is helpful, but not mandatory.
No prior professional experience in electrical design is required.
Basic knowledge of AutoCAD is recommended but not essential.
Students should be willing to learn electrical design concepts, calculations, and practical MEP applications.
Description
Learn practical Electrical Design and Calculations for real-world MEP and building projects.
Are you looking to build a strong career in Electrical Design or MEP Engineering?
Do you want to learn how electrical design calculations are performed in actual projects rather than studying only theoretical concepts?
This Electrical Design Masterclass is designed to give you practical knowledge of electrical design, engineering calculations, and building electrical systems.
What You Will Learn
Module 01 - Introduction to Electrical Systems
Introduction to electrical systems and basic electrical concepts
Single phase vs. three phase systems
Electrical codes & standards
Module 02 - Building Services
Understanding electrical services in buildings
Module 03 - Power Distribution in Buildings
Electrical load types (lighting, power, HVAC, etc.)
Power supply systems
Grid Connection
Module 04 - Electrical Equipment Selection
Exhaust Fan Selection
Ceiling Fan Selection
Module 05 - Lighting Design
Manual lighting design calculation
Illumination
Power Outlets & Switches
Module 06 - Lighting Design with CG Lux Software
Introduction to CG Lux Software
Practical lighting design using software
Understanding lighting calculations and results
Module 07 - Lighting Design with DIALux Evo
Introduction to DIALux Evo
Creating practical lighting designs
Lux level calculations and lighting analysis
Understanding and interpreting DIALux results
Module 08 - Electrical Load Calculation
Understanding electrical load calculation
Connected load and demand load
Load estimation and demand factors
Preparation of practical load schedules
Module 09 - Cable and Conduit Sizing
Practical cable sizing methods
Cable selection based on electrical load
Conduit sizing and selection
Understanding important cable sizing considerations
Module 10 - Cable Tray & Trunking Sizing
Understanding cable tray systems
Cable tray sizing and selection
Trunking sizing
Practical cable management considerations
Module 11 - Panel Board Design and SLD
Understanding electrical panels and distribution boards
Panel board design concepts
Single Line Diagram (SLD)
Electrical distribution and circuit arrangement
Module 12 - Emergency Power Systems
Solar Panel Selection
UPS Selection
Diesel Generator Selection
Module 13 - Transformer Selection
Understanding transformers used in building electrical systems
Transformer capacity calculation
Practical transformer selection
Module 14 - Earthing and Lightning Protection Systems
Fundamentals of electrical earthing
Earthing system design concepts
Understanding lightning protection systems
Capacitor Bank
Module 15 - Fire Alarm and ELV Systems Overview
Introduction to Fire Alarm Systems
Basic fire alarm system components and operation
Public address system
This course is suitable for
• Electrical Engineering students
• Fresh Electrical Engineering graduates
• Electrical Engineers
• MEP Engineers
• Electrical Design Engineers
• MEP Design Engineers
• Beginners who want to start a career in Electrical Design
• Working professionals who want to upgrade their Electrical Design skills
• Professionals from other MEP disciplines who want to understand electrical systems
By the end of this course, you will have a strong practical understanding of Electrical Design, Electrical Calculations, Load Calculation, Cable Sizing, Voltage Drop, Single Line Diagrams, Lighting Design, Power Distribution, and Electrical Protection.
If you want to move beyond electrical theory and develop practical skills for MEP Electrical Design projects, this Electrical Design Masterclass is the right place to start.
Who this course is for
Electrical Engineering students and fresh graduates who want to learn practical electrical design.
MEP Engineers and Electrical Engineers who want to improve their electrical design and calculation skills.
Beginners who want to build a career in MEP Electrical Design.
HVAC, Plumbing, Fire Fighting, or other MEP professionals who want to understand electrical design.
Anyone interested in learning practical Electrical Design and Calculations for real-world MEP projects.
Homepage

Download: Electrical Design Masterclass From Beginner to Professional

Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live

Download: Electrical Design Masterclass From Beginner to Professional

No Password - Links are Interchangeable

 

[PowerUploader]

Electrical Design Masterclass From Beginner to Professional

Download