Published 8/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 832.71 MB | Duration: 0h 57m
ADVANCE HVAC DESIGNING USING REVIT MEP
What you'll learn
PLUMBING DESIGN ENGINEERS
PLUMBING FOR HEALTH CARE FACILITY
OXYGEN SYSTEMS
MEDICAL GASES
Requirements
BASIC CONCEPTS OF MECHANICAL ENGINEERING
Description
In this course you will learn about designing of HVAC system of health care facility. You can study all standard used while designing of health care facilities and also design theese system using Revit in 3d. As you know that HVAC designing of health care facilities are more complex than normal residential and commercial building designing system. In health care facilities we can focus to improve indoor air quality.In health care facilities we decrease the risk of movement of infected particles like you know that in patient room some patients are suffering from those types of diseases which can contaminate environment during they are sneezing and coughing. So, this contaminated air can move from one patient room to other rooms for that purpose we can create negative pressure class n rooms so that air cannot move to other area and contaminate air.Some patents are suffering from those diseases in which their immunity is very low so, the polluted air can harm them because their immunity is very low for that we can use HEPA filters and supply fresh and clean environment.So, in this course you can learn about designing of AII rooms, Protective Environment rooms, emergency Rooms and others. For that we can Design all these rooms using Revit. In Revit we can calculate Colling and Heating Load as per ASHRAE standards and an also Do complete duct work with all calculations like tstic calculations of rooms using Excel sheets. This is one of the best courses of Designing HVAC of Health care facilities for Ever.
Overview
Section 1: Introduction
Lecture 1 Introduction
Section 2: Introduction of HVAC in health care facility
Lecture 2 HVAC SYSTEM REQUIREMENT IN HEALTHCARE FACILATIES
Lecture 3 INFECTION CONTROL
Section 3: ISOLATION ROOMS
Lecture 4 ISOLATION ROOMS
Lecture 5 Airborne infection isolation (AII)
Lecture 6 Protective environment (PE)
Lecture 7 classification affect HVAC designer
Section 4: HVAC CONTROL PARAMETERS FOR ISOLATION ROOMS
Lecture 8 factors affect the local concentration of particles
Lecture 9 prevent the spread of airborne contaminants
Section 5: ROOM PRESSURE CONTROL
Lecture 10 class N rooms
Lecture 11 Infection-Control and Ventilation Requirements for "AII" Rooms
Lecture 12 Infection-Control and Ventilation Requirements for "AII" Rooms 2
Lecture 13 Infection-Control and Ventilation Requirements for "AII" Rooms 3
Lecture 14 Infection-Control and Ventilation Requirements for "AII" Rooms last
Section 6: Load calculation of AII isolated room using Revit
Lecture 15 inserting revit file
Lecture 16 load calculation of class islation room
Lecture 17 load calculation of class islation room 1
MECHANICAL,ELECTRICAL ENGINEERS AND EXPERIANCED PEOPLES
Homepage
Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live
Links are Interchangeable - No Password - Single Extraction
