DJI Drohne Battery hack!! Suche crack für TRB 2300 von Patboonlab damit unendlich fliegen
TRB is mainly intended for repairing firmware in controllers which are installed in battery packs. Program allows you to modify the battery firmware using a special protocol (usually I2C or SMBus). To do such modification, you don't have to remove the chip from the board itself.
Minimum hardware requirements: Windows OS (7, 8, 10 or 11), 1GB RAM, 8GB Disk Space, Network Connection
To program a battery, you will need a special adapter that can communicate with SMBus and computer. We recommend adapter EV2300 or EV2400. Other adapters are not recommended to be used with TRB, as you might be experiencing an unstable connection and such connection could corrupt your battery firmware. This could be permanent.
If the battery is locked with a password, and TRB has the target controller in supported chips, TRB should be able to remove the lock automatically (if no other information is stated about the chip).
TRB was developed in November 2020, with it's first public release on 27/11/2020. Through the time, it went through some major changes.
TRB's plan is to support all latest batteries for drones (including all major brands).
Developers at TRB are open to new ideas and challenges. We will also implement a good idea, if it's rea****ble. Once we would decide it's a good idea, we would give you a reward for your idea.
Latest version of TRB Client is: 2.0.0.1 and of TRB Updater is: 1.0.0.2
TRB is mainly intended for repairing firmware in controllers which are installed in battery packs. Program allows you to modify the battery firmware using a special protocol (usually I2C or SMBus). To do such modification, you don't have to remove the chip from the board itself.
Minimum hardware requirements: Windows OS (7, 8, 10 or 11), 1GB RAM, 8GB Disk Space, Network Connection
To program a battery, you will need a special adapter that can communicate with SMBus and computer. We recommend adapter EV2300 or EV2400. Other adapters are not recommended to be used with TRB, as you might be experiencing an unstable connection and such connection could corrupt your battery firmware. This could be permanent.
If the battery is locked with a password, and TRB has the target controller in supported chips, TRB should be able to remove the lock automatically (if no other information is stated about the chip).
TRB was developed in November 2020, with it's first public release on 27/11/2020. Through the time, it went through some major changes.
TRB's plan is to support all latest batteries for drones (including all major brands).
Developers at TRB are open to new ideas and challenges. We will also implement a good idea, if it's rea****ble. Once we would decide it's a good idea, we would give you a reward for your idea.
Latest version of TRB Client is: 2.0.0.1 and of TRB Updater is: 1.0.0.2
