KAMAL
MyBoerse.bz Pro Member
Altair FluxMotor 2019.1.1 x64 HotFix Only
Altair FluxMotor 2019.1.1 x64 HotFix Only | 996 MB | Language: English
Altair announces the release of FluxMotor 2019.1.1, a dedicated platform focusing on the pre-design of electric rotating machines. Apart from fixes in the detected issues, this version also hosts noteworthy enhancements and implementations.
Altair FluxMotor 2019.1.1 Release Notes - Date: 14 May 2020
Altair FluxMotor 2019.1.1 is available with corrections and improvements. It can be applied as an update to an existing installation of FluxMotor 2019.1.
Fixed issues of FluxMotor 2019.1.1
Induction machines with skewed topologies - Motor Factory - Test Environment
- Very often, the results of computations may be wrong when a skewed topology is considered for the squirrel cage or for the slot (ref.: FXM-12398).
The visible signs of this problem were mainly the following ones:
. Anomalies on the shape of the generated curves versus slip (or speed) like torque-slip curve
for instance
. The results got with the test "Working point / Sine Wave / U, f, N" are not consistent with
those got with the test "Performance mapping / Sine Wave/ T(Slip)"
Induction machines - Motor Factory - Design and Test Environment
- End-ring impedance computations using the user mode fails (ref.: FXM-12399).
- The rounding value for the slip is not well considered. For instance, a slip equal to 2.33333 % cannot be considered. The nearest possible value is 2.334 %. This leads to a crash when the tests are run. (ref.: FXM-12368).
- CS and OCS temperature are not considered for computing end-ring inter-bar resistance in the DESIGN environment. The temperature of bars is considered instead (ref.: FXM-12451).
- OCS temperature is not considered for computing end-ring inter-bar resistance in the TEST environment. The Connection Side temperature is considered for both sides (ref.: FXM-12452).
- The computation of the average value of the end ring inductance doesn't consider the Opposite Connection Side component (ref.: FXM-12561).
Induction machines - Motor Factory - Export Environment
- The X-Factors of end ring resistance and inductance are not reported in the section ("Winding and cage") where test result values are displayed. To be noted that X-Factors are well considered in the computation (ref.: FXM-12550).
- The inductance X-Factor using for induction machine tests and exports is wrong. It is replaced by resistance X-Factor (ref.: FXM-12562).
This issue has been corrected
FluxMotor is a flexible open software tool dedicated to the pre-design of electric rotating machines. FluxMotor is part of Altair's HyperWorks CAE Suite, which includes Flux the leading software for low frequency electromagnetic and thermal simulations.
The software tool allows users to design and create machines from standard or customized parts, as well as to intuitively add windings and materials to run a selection of tests and compare machine capacity. Based on modern technology, the standalone platform offers fast and accurate computations. When necessary, connection with Altair Flux finite element software enables more advanced studies, taking into account more complex phenomenon.
Discover Altair FluxMotor an Easy to Use Software Dedicated to e-Motor Concept Design
Altair is a global technology company that provides software and cloud solutions in the areas of product development, high performance computing (HPC) and data analytics. Altair enables organizations across broad industry segments to compete more effectively in a connected world while creating a more sustainable future.
Product: Altair FluxMotor
Version: 2019.1.1 HotFix Only
Supported Architectures: x64
Website Home Page :
Language: english
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: Altair FluxMotor 2019.0 and above
Size: 996.8 mb
To install the hot fix FluxMotor 2019.1.1, you must have previously installed a version of FluxMotor 2019.
Supported operating systems
FluxMotor 2019.1.1 is qualified * on the following operating systems:
✓ Windows 10 - 64 bits
* Note: A qualified platform is a platform on which all the quality assurance tests have been performed.
DOWNLOAD LINKS:
Altair FluxMotor 2019.1.1 x64 HotFix Only | 996 MB | Language: English
Altair announces the release of FluxMotor 2019.1.1, a dedicated platform focusing on the pre-design of electric rotating machines. Apart from fixes in the detected issues, this version also hosts noteworthy enhancements and implementations.
Altair FluxMotor 2019.1.1 Release Notes - Date: 14 May 2020
Altair FluxMotor 2019.1.1 is available with corrections and improvements. It can be applied as an update to an existing installation of FluxMotor 2019.1.
Fixed issues of FluxMotor 2019.1.1
Induction machines with skewed topologies - Motor Factory - Test Environment
- Very often, the results of computations may be wrong when a skewed topology is considered for the squirrel cage or for the slot (ref.: FXM-12398).
The visible signs of this problem were mainly the following ones:
. Anomalies on the shape of the generated curves versus slip (or speed) like torque-slip curve
for instance
. The results got with the test "Working point / Sine Wave / U, f, N" are not consistent with
those got with the test "Performance mapping / Sine Wave/ T(Slip)"
Induction machines - Motor Factory - Design and Test Environment
- End-ring impedance computations using the user mode fails (ref.: FXM-12399).
- The rounding value for the slip is not well considered. For instance, a slip equal to 2.33333 % cannot be considered. The nearest possible value is 2.334 %. This leads to a crash when the tests are run. (ref.: FXM-12368).
- CS and OCS temperature are not considered for computing end-ring inter-bar resistance in the DESIGN environment. The temperature of bars is considered instead (ref.: FXM-12451).
- OCS temperature is not considered for computing end-ring inter-bar resistance in the TEST environment. The Connection Side temperature is considered for both sides (ref.: FXM-12452).
- The computation of the average value of the end ring inductance doesn't consider the Opposite Connection Side component (ref.: FXM-12561).
Induction machines - Motor Factory - Export Environment
- The X-Factors of end ring resistance and inductance are not reported in the section ("Winding and cage") where test result values are displayed. To be noted that X-Factors are well considered in the computation (ref.: FXM-12550).
- The inductance X-Factor using for induction machine tests and exports is wrong. It is replaced by resistance X-Factor (ref.: FXM-12562).
This issue has been corrected
FluxMotor is a flexible open software tool dedicated to the pre-design of electric rotating machines. FluxMotor is part of Altair's HyperWorks CAE Suite, which includes Flux the leading software for low frequency electromagnetic and thermal simulations.
The software tool allows users to design and create machines from standard or customized parts, as well as to intuitively add windings and materials to run a selection of tests and compare machine capacity. Based on modern technology, the standalone platform offers fast and accurate computations. When necessary, connection with Altair Flux finite element software enables more advanced studies, taking into account more complex phenomenon.
Discover Altair FluxMotor an Easy to Use Software Dedicated to e-Motor Concept Design
Altair is a global technology company that provides software and cloud solutions in the areas of product development, high performance computing (HPC) and data analytics. Altair enables organizations across broad industry segments to compete more effectively in a connected world while creating a more sustainable future.
Product: Altair FluxMotor
Version: 2019.1.1 HotFix Only
Supported Architectures: x64
Website Home Page :
Language: english
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: Altair FluxMotor 2019.0 and above
Size: 996.8 mb
To install the hot fix FluxMotor 2019.1.1, you must have previously installed a version of FluxMotor 2019.
Supported operating systems
FluxMotor 2019.1.1 is qualified * on the following operating systems:
✓ Windows 10 - 64 bits
* Note: A qualified platform is a platform on which all the quality assurance tests have been performed.
DOWNLOAD LINKS:
