Understand all model available from NFT and the difference between them
Able to configure the NFT device as a standalone mode
Able to configure the NFT devices as Master/Managed AP using the integrated mode
Able to configure the NFT devices as office AP from the LigoWave cloud controller
Able to configure the NFT devices as Mini-Hotspot from the LigoWave cloud controller
Able to configure the NFT devices as Easy Mesh from the LigoWave cloud controller
Understand what are the channel width size possible on LigoWave infinity devices
Understand how to create different Virtual Access points with SSID's on the NFT devices
Understand how to connect to the NFT device using its DHCP IP Fallback
Understand how you can reset the NFT device using different method
Understand how to enable SSDP on the NFT device to be shown on your network from your PC
Requirements
Basic TCP/IP knowledge
Basic Wireless knowledge
Basic networking knowledge
Description
Welcome to the 1st online course from LigoWave official courses series.

This course will help you to be able to configure LigoWave Infinity (NFT) devices via different mode:

Standalone AP

Integrated controller (Master & Managed AP)

Cloud controller

Office AP

Mini-hotspot

Easy Mesh

This course is fully authorized by LigoWave and it is the only online course available from LigoWave. As being an authorized course, then you are able after finishing this course to do its official exam and get a certificate from LigoWave in case it is passed successfully (passing score is 65%)

To be able to do the online exam, you need to meet the following conditions:

Register to the course and watch it 100%

Send me the following information on to create the online exam for you:

First name

Last name

Email address

Phone number

Address & Country

The exam fee is 50 Euro (excl. VAT)

The exam is for only 1 attempt. In case a 2nd attempt is required, the exam fee will be charged for another 50 Euro (excl. VAT)

In case of course refund, then the exam will not be available for you even if the exam fee is paid.

I highly advise for the exam to have the Datasheet of the NFT products printed. You can download them from LigoWave website.

This course is based on 10 step-by-step LABS. So if you want to masterize the configurations on LigoWave inifnity devices, then you need to do the LABs as much as possible. For this, you require 1 PC with internet connection and 2x LigoWave NFT2ac devices and of course UTP cables.

I hope that this course will help you to become certified from LigoWave.

Who this course is for:
Anyone interested to learn how to configure LigoWave NFT device
Anyone interested to have an official certificate from LigoWave after successfully passing the official exam